To Next PageTo Next Page
Need help?Do you have a question about the Sony FWD-42PV1 and is the answer not in the manual?
General| Depth | 121 mm |
|---|---|
| Width | 1033 mm |
| Height | 631 mm |
| Weight | 29000 g |
| HD type | Not supported |
| I/O ports | -DVI-HDCP; Audio In -D-sub 15-pin (RGB / YUV), DIV; Audio In Remote (RS-232C) D-sub 9-pin, Audio Out, Control S In/Out; -S-Video In / Out; Audio In, Composite In Yes, Composite Out |
| Audio system | Surround (Off / Hall / Simulated) |
| Product color | Black |
| Audio (L/R) in | 1 |
| Noise reduction | Yes |
| Display diagonal | 42 \ |
| Display brightness | 50 cd/m² |
| Display resolution | 852 x 480 pixels |
| Display technology | Plasma |
| Power requirements | 100 - 240V, 50/60Hz (3.5A max) |
| Contrast ratio (typical) | - |
| Display number of colors | 1.073 billion colors |
| Storage temperature (T-T) | -10 - 40 °C |
| Analog signal format system | NTSC, PAL, SECAM |
| Operating temperature (T-T) | 0 - 35 °C |
| Power consumption (typical) | 260 W |
| Operating relative humidity (H-H) | 20 - 90 % |
Section to record model and serial numbers for service inquiries.
Covers basic safety rules for operating the display unit.
Guidance on using the correct power cord for local power supply.
Instructions for operating the remote commander, including battery installation and troubleshooting.
Notes on preventing after-images and burn-in on the display.
Steps for connecting speakers, AC power cord, and cable management.
Adjusting picture modes, contrast, brightness, and sound levels.
Fine-tuning contrast, brightness, chroma, phase, and sharpness.
Using screen saver modes to prevent burn-in and after-images.
