EasyManua.ls Logo

Sony H3113 - Sharing Your Cellular Data Connection

Sony H3113
112 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
To find the MAC address for your device
1 Find and tap Settings > Network & Internet > Wi-Fi.
2 Tap Wi-Fi preferences > Advanced.
3 MAC address is displayed in the list.
The Wi-Fi Mac address is also displayed under Settings > System > About phone > Status >
Wi-Fi MAC address.
WPS
WPS (Wi-Fi Protected Setup) is a wireless networking standard that helps you
establish secure wireless network connections. WPS makes it easy for you to set up
WPA (Wi-Fi Protected Access) encryption to secure your network. You can also add
new devices to an existing network without entering long passwords.
Use one of these methods to enable WPS:
Push button method – simply push a button on a WPS-supported device, for
example, a router.
PIN method – your device creates a random PIN, which you enter on the WPS-
supported device.
To connect to a Wi-Fi network using a WPS button
1 Find and tap Settings > Network & Internet > Wi-Fi.
2 Turn on Wi-Fi if it is not already on.
3 Tap Wi-Fi preferences > Advanced > WPS Push Button, then press the WPS
button on the WPS-supported device.
To connect to a Wi-Fi network using a WPS PIN
1 Find and tap Settings > Network & Internet > Wi-Fi.
2 Turn on Wi-Fi if it is not already on.
3 Tap Wi-Fi preferences > Advanced > WPS PIN Entry.
4 On the WPS-supported device, enter the PIN that appears on your device.
Sharing your cellular data connection
You can share your cellular data connection with other devices in several ways.
USB tethering: Share your cellular data connection with a single computer using a
USB cable.
Portable Wi-Fi hotspot: Share your cellular data connection with up to 10 other
devices simultaneously, including devices that support WPS technology.
One-touch portable hotspot: Touch devices to start sharing your cellular
connection over Wi-Fi.
Bluetooth® tethering: Share your cellular data connection with up to four other
devices via Bluetooth®.
To share your data connection using a USB cable
1 Connect your device to a computer, using the USB cable that came with it.
2 Find and tap Settings > Network & Internet > Tethering & portable
hotspot.
3 Tap the USB tethering slider, then tap OK if prompted.
is displayed in the
status bar once you are connected.
4 To stop sharing your data connection, tap the USB tethering slider or
disconnect the USB cable.
You cannot share your device's data connection and SD card over a USB cable at the same
time.
49
This is an internet version of this publication. © Print only for private use.

Table of Contents

Related product manuals