Dubbing/Editing
112
To print another image
Repeat steps 1 to 6.
To stop printing
Touch [CANCEL] while printing.
To finish printing
Touch [END] and disconnect the USB cable
from your Handycam Station and printer.
b Note
• Do not attempt the following operations when
is on the screen. The operations may not be
performed properly.
– Sliding the POWER switch to select other power
modes
– Disconnecting the USB cable from your
Handycam Station or printer
– Removing the “Memory Stick Duo” from your
camcorder
• If the printer stops working, disconnect the USB
cable and restart the operation from the beginning.
• Some printer models may not support the date
printing function. Refer to your printer’s operating
instructions for details.
• We cannot guarantee the printing of images recorded
with a device other than your camcorder.
To Next Page
Loading...
Need help?
General