28
US
Tips
In the default setting, the screen display changes to the simple display after about 4 seconds ([Display
Setting]). The display changes to the detailed display when you touch anywhere on the screen except the
buttons on the LCD screen so that you can use items.
The viewfinder
When you record while viewing through the viewfinder, keep your eye close to the viewfinder,
while the LCD screen is closed. If the indications in the viewfinder appear blurred, adjust the
viewfinder lens adjustment lever located beneath the viewfinder. If [VF/Panel] is set to [Auto],
as your eye moves closer to the viewfinder, the eye sensor detects it and the display changes
to the viewfinder even though the LCD screen is open. If the eye sensor cannot detect it, the
display remains on the LCD screen.
The display becomes dark after a certain period when you use the
viewfinder.
about 4 sec
after
To Next Page
Loading...
Need help?
General