32
OPERATION Menu
OPERATION
Page title
Page No.
Item Settings Description
<VF DISPLAY>
01 (U04)
EX ON
, OFF, 3S
ZOOM ON, OFF
, 3S
DISP LEFT, RIGT
FOCUS ON, OFF
, 3S Valid only when a serial lens is used.
ND ON
, OFF, 3S
5600K ON
, OFF, 3S
IRIS ON
, OFF, 3S
WHITE ON, OFF
, 3S
D.EXT ON, OFF, 3S
GAIN ON
, OFF, 3S
SHUTTER ON
, OFF, 3S
BATT ON, OFF
, 3S
RETURN ON, OFF, 3S
TALK ON
, OFF, 3S
MESSAGE ALL
, WRN, AT, OFF ALL: Displays all messages.
WRN: Displays warning messages and higher.
AT: Displays Auto Setup information and higher.
FOLLOW F ON, OFF
, 3S
FOCUS NAME OFF, 1S, 3S, 5S, ON
Displays/hides Marker Name, and sets the display
time.
FOCUS FORM NORMAL
, ABS(AUTO), ABS(m),
ABS(ft)
Sets the FOCUS display format.
NORMAL: Displayed in the range 0 to 255 (no
units).
ABS(AUTO): Displayed in the units (meters or feet)
set on the lens.
ABS(m): Displayed in meters.
ABS(ft):Displayed in feet.
<‘ ! ’IND>
02 (U05)
ND ON
, OFF [IND]: Sets whether to be included in the status
indications on the viewfinder screen (see
page 21).
[NORMAL]: Specifies the conditions under which
the ‘!’ indication is not to be displayed even if
[IND] is ON. (By specifying the standard or
normal conditions here, non-standard or
abnormal conditions can be found with the ‘!’
indication on the viewfinder screen.)
e.g.: With the default setting of ND, the ‘!’ indication
is displayed when an ND filter other than 1 is
selected.
---: When a CCU is connected (cannot be changed)
1
, 2, 3, 4, 5 (combination allowed)
WHITE ON
, OFF, ---
P, A
, B (combination allowed)
5600K ON
, OFF, ---
ON, OFF
GAIN ON, OFF, ---
L
, M, H (combination allowed)
SHUTTER ON
, OFF, ---
ON, OFF
FAN ON, OFF
AUTO1
, AUTO2, MIN, MAX
EXT ON
, OFF
Y TALLY ON
, OFF
To Next Page
Loading...
