34
<FOCUS POSITION
METER2>
06
ADJUSTED SIGN
SENSE 1 to 5, 2
Sets the sensitivity for the ADJUST decision.
The higher the value, the higher the sensitivity.
NAME DISP OFF, 1S, 3S, 5S, ON
Displays/hides Marker Name, and sets the display
time.
FRAME DISP OFF, 1S, 3S, 5S, ON
Displays/hides Adjust Frame, and sets the display
time.
FRAME WIDTH 1 to 5, 2
Sets the width of Adjust Frame.
MARKER CONFIG
[REG] MKR1, 2, 3 Execute via ENTER. Registers the marker on the current focus position.
(This item is not available when the marker
registering operation is assigned to the dedicated
switch.)
[DISP] MKR1, 2, 3 OFF
, ON Displays/hides the marker. (This item is not
available when the marker registering operation is
assigned to the dedicated switch.)
[COLOR] MKR1,
2, 3
RED
, GREEN, BLUE, YELLOW,
ORANGE, PURPLE, GRAY,
BLACK, WHITE
Sets the color for the triangular area of the marker.
[NAME] MKR1, 2,
3
Up to 8 characters (default setting:
MARKER 1 to 3)
Sets the character of Marker Name.
See “To specify a character string” on page 23.
[POS] MKR1, 2, 3 0
to 999 Sets the position of Marker.
CURRENT FOCUS
DIST
Displays the current focus distance (display only).
<FOCUS ASSIST>
07 (U03)
INDICATOR ON, OFF
MODE BOX, B&W, COL
BTM
, LEFT, TOP, RIGHT
LEVEL MIN, 0 to 10, 4
QUICK, SMOOTH
GAIN 0 to 99, 50
OFFSET 0 to 99, 50
AREA MARKER ON, OFF
SIZE SMALL, MIDDLE, LARGE
POSITION LEFT, CENTER
, RIGHT
POSITION H 0 to 99, 50
POSITION V 0 to 99, 50
<ZEBRA>
08 (U08)
ZEBRA ON, OFF
1, 2, 1&2
ZEBRA1
LEVEL 50 to 109%, 70%
WIDTH 0 to 30%, 10%
ZEBRA2 50 to 109%, 100%
OPERATION
Page title
Page No.
Item Settings Description
To Next Page
Loading...
