41
<SATURATION>
P06
SATURATION –99 to +99, 0
ON, OFF
LOW KEY SAT –99 to +99, 0
RANGE LOW, L.MID, H.MID, HIGH
ON, OFF
TEST OFF, SAW, 10STEP
<KNEE>
P07
K POINT R/G/B/M: –99 to +99, 0 R, G, B, and M (master) values can be
independently set.
Absolute values are displayed in ABS mode except
for M (master).
K SLOPE R/G/B/M: –99 to +99, 0
KNEE ON, OFF
KNEE MAX ON, OFF
KNEE SAT –99 to +99, 0
ON, OFF
AUTO KNEE OFF, AUTO
POINT LIMIT –99 to +99, 0
Absolute value is displayed in ABS mode.
SLOPE –99 to +99, 0
Absolute value is displayed in ABS mode.
<WHITE CLIP>
P08
W CLIP –99 to +99, 0
ON, OFF
ABS Highlighted: ABS (Absolute) mode
<DETAIL 1>
P09
DETAIL ON
, OFF
LEVEL –99 to +99, 0
Absolute value is displayed in ABS mode.
LIMITER [M] –99 to +99, 0
LIMITER [WHT] –99 to +99, 0 Absolute value is displayed in ABS mode.
LIMITER [BLK] –99 to +99, 0
Absolute value is displayed in ABS mode.
CRISP –99 to +99, 0
Absolute value is displayed in ABS mode.
LEVEL DEPEND –99 to +99, 0
Absolute value is displayed in ABS mode.
ON
, OFF
ABS Highlighted: ABS (Absolute) mode
<DETAIL 2>
P10
H/V RATIO –99 to +99, 0
Absolute value is displayed in ABS mode.
FREQ –99 to +99, 0
Absolute value is displayed in ABS mode.
MIX RATIO –99 to +99, 0
Absolute value is displayed in ABS mode.
KNEE APT –99 to +99, 0
Absolute value is displayed in ABS mode.
ON, OFF
DTL H/V MODE H/V, V only
ABS Highlighted: ABS (Absolute) mode
<SKIN DETAIL>
P11
SKIN DTL ON, OFF
SKIN GATE OFF, 1, 2, 3, (MAT) 1, 2, 3: The skin gate function can be turned on for
the specified channel only.
(MAT): Displayed when GATE of <MULTI MATRIX>
is ON.
NATURAL SKINDTL OFF
, ON
ZOOM LINK OFF
, ON
TELE 0 to 99
WIDE 0 to 99
CH SW 1: (ON), 2/3: ON, OFF Sets the skin tone detail function independently for
each channel. (Channel 1 is always set to ON.)
Absolute values are indicated for LEVEL only in
ABS mode.
HUE 1/2/3: Execute via ENTER.
PHASE 1/2/3: 0
to 359
WIDTH 1/2/3: 0 to 90, 29
SAT 1/2/3: –99 to +99, –89
LEVEL 1/2/3: –99 to +99, 0
Y LIMIT 1/2/3: 0 to 99
PAINT
Page title
Page No.
Item Settings Description
To Next Page
Loading...
