Sony HDC5500 - Page 4

4
a: Required camera operating software
*1 On HDC5500 models for Japan and China, HZC-UHD50 is pre-installed.
*2 HKC-FB50 or HKC-WL50 is required.
*3HKC-FB50 is required.
*4Use on triax model is not supported.
*5For the HDC3500, attachment of optional items to the camera control unit is required. For details, contact a Sony sales representative.
• Limited subscription licenses are available for each software, with the period of validity of the license indicated by the last
character of the name.
If a character that does not denote a license period of validity is the last character, the license will not expire (indefinite).
– M: Valid for 30 days
– W: Valid for 7 days
– P: Portable licenses valid for 365 days*
* Portable license are available for HZC-HFR50/UHD50 software
Notes on camera operating software use
The following limitations apply according to the camera operating software and side panel attachment.
4K-59.94P (×2) a a
4K-50P (×2) a a
4K-24P a
4K-23.98P a
4K-25P a
HD (RGB 444) a
Camera operating software Limitations
HZC-UG50
(4:4:4 output)
• When an HKC-WL50 or HKC-TR37 is installed in the HDC5500/3500, 4:4:4 output is not
supported.
HZC-PRV50
(Progressive output)
• When HZC-HFR50 or HZC-UHD50 software is installed in the HDC5500/3500, this option is not
required.
• When an HKC-FB50 or HKC-TR37 is installed in the HDC5500/3500, this option is not required.
• When an HKC-FB50 or HKC-WL50 is installed in the HDC5500/3500, 1080P (HDR) output is not
supported.
HZC-PSF50
(PsF output)
• When an HKC-TR37 is installed in the HDC5500/3500, 24PsF and 23.98PsF output are not
supported.
HZC-DFR50
(×2 speed output)
• When HZC-HFR50 software is installed in the HDC5500/3500, this option is not required.
• When an HKC-FB50 is installed in the HDC5500/3500, ×2 speed interlaced output is not
supported.
• When an HKC-WL50 or HKC-TR37 is installed in the HDC5500/3500, ×2 speed output is not
supported.
• On the HDC3500 as shipped or when an HKC-FB30 is installed in the HDC5500/3500, only ×2
speed interlaced output is supported.
HZC-HFR50
(×2/3/4/6/8 speed output)
• On the HDC3500 as shipped or when an HKC-FB30 is installed in the HDC5500/3500, only ×2
speed interlaced output is supported.
• When an HKC-TR37 is installed in the HDC5500/3500, ×2 speed and higher output is not
supported.
HZC-UHD50
(4K output)
• When an HKC-FB50 is installed in the HDC5500/3500, 4K output is supported.
• When an HKC-WL50 is installed in the HDC5500/3500, 4K 24P, 23.98P, 25P, and 29.97P output
are not supported.
• When an HKC-TR37 is installed in the HDC5500/3500, 4K output is not supported.
Camera operating software
Extended formats HZC-DFR50 HZC-HFR50 HZC-PRV50 HZC-PSF50 HZC-UG50 HZC-UHD50
*1