Need help?Do you have a question about the Sony HDCU4300 and is the answer not in the manual?
General| Type | Camera Control Unit |
|---|---|
| Supported Cameras | HDC-4300 HDC-3500 HDC-3100 |
| Power Requirements | AC 100-240V, 50/60Hz |
| Operating Temperature | 32°F to 104°F (0°C to 40°C) |
| Storage Temperature | -4 to 140°F / -20 to 60°C |
| Supported Formats | HD, 3G, 4K |
| Input | HD-SDI, 3G-SDI |
| Video Outputs | HD-SDI, 3G-SDI, 4K (optional) |
| Audio Inputs | XLR x4 (Analog), AES/EBU x2 |
Describes front panel indicators like tally lights, status indicators, and control blocks.
Lists and describes rear panel input/output connectors like TRUNK, RCP/CNU, SDI, LAN, and AUDIO OUT.
Information on installing and using the HKCU-IP43F Networked Media Interface Board.
Explains how to connect a 4K format camera system using optical fiber cables.
Details the HFR video formats supported and signal processing capabilities.
Explains how to produce HDR video output by setting HDR MODE to Live HDR for 4K format systems.
Configuration details for SNMP agent and trap settings, including IP address, port, and version.
How to display the status screen and lists the types of information shown.
Explains how to navigate and change settings using the front panel controls.
To Next Page
