HMZ-T1 4-297-825-12 (1)
Connect a playback equipment and a TV.
Connect the AC power cord and plug it
in.
Connect the head mounted unit.
Head mounted unit
Processor unit (Front)
Enjoy Video in Four Steps
By design, the system will oer an impressive experience only after you take
a moment to adjust it to t you well. Conrm the following steps and prepare
for use before enjoying content with this system.
1 Connect
2 Wear Adjust the head mounted unit correctly.
Adjust the head mounted unit securely to your head, so that the
display stays directly in front of your eyes.
3 Set Up Adjust the lens span correctly.
The distance between
the centers of the pupils
Wide Narrow
The distance between pupils varies from person to person. Wear the
head mounted unit correctly and adjust the lens span to the correct
width to align images on the left and right lenses and form images.
4 Enjoy
What’s in the box
AC power cord (2
for Dubai and Saudi
Arabian models, 1 for
other models)Head mounted unit Processor unit HDMI cable (1) Accessories
Head Mounted Display
Startup Guide
HMZ-T1
Before use, also refer to “Health Precautions” and
“Precautions” in the “Reference Guide.”
4-297-825-
12
(1)
1 Connect
HDMI
IN
TV
HDMI
OUT
Blu-ray Disc
TM
player
Game console
Playback Equipment
Processor unit (Back)
Turn the playback equipment on.
© 2011 Sony Corporation Printed in Japan
If your playback equipment has only one
HDMI OUT jack and you also want to
watch content from it on a TV, connect it
to the processor unit with the supplied
High-Speed HDMI cable, and connect
the processor unit to the TV with another
High-Speed HDMI cable (recommended
cable length: up to 5 m (17 ft)).
Notes
Make sure to set “HDMI pass-through” to
“On” in the “General Setup” menu when
connecting a TV or other display device.
Make sure that the system is in standby
mode when watching content on a
connected TV or other display device.
HDMI cable (supplied)
To wall outlet
To Next Page
Need help?
General
Weight and Dimensions
