EasyManua.ls Logo

Sony HT-A3000 - Page 53

Sony HT-A3000
223 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
53
US
Specifications
Amplifier section
U.S. models:
POWER OUTPUT AND TOTAL HARMONIC
DISTORTION:
(FTC)
Front L + Front R:
With 6 ohms loads, both channels
driven, from 20 Hz - 20,000 Hz; rated
33 W per channel minimum RMS
power, with no more than 1% total
harmonic distortion from 250 mW to
rated output.
POWER OUTPUT (reference)
Front L/Front R speaker blocks: 50 W
(per channel at 6 ohms, 1 kHz)
Center speaker block: 50 W (at 6 ohms,
1 kHz)
Subwoofer blocks: 50 W (per channel
at 6 ohms, 100 Hz)
Canadian models:
POWER OUTPUT (rated)
Front L + Front R: 33 W + 33 W (at 6
ohms, 1 kHz 1 %THD)
POWER OUTPUT (reference)
Front L/Front R speaker blocks: 50 W
(per channel at 6 ohms, 1 kHz)
Center speaker block: 50 W (at 6 ohms,
1 kHz)
Subwoofer blocks: 50 W (per channel
at 6 ohms, 100 Hz)
Inputs
TV IN (OPT)
Outputs
HDMI OUT (TV eARC/ARC)
S-CENTER OUT
HDMI Section
Connector
Type A (19pin)
USB section
(USB) port: 1 A
Type A (For connecting USB memory)
Wireless LAN section
Communication system
IEEE 802.11 a/b/g/n/ac
Frequency band
2.4 GHz, 5 GHz
BLUETOOTH section
Communication system
BLUETOOTH Specification version 5.0
Output
BLUETOOTH Specification Power
Class 1
Maximum communication range
Line of sight approx. 30 m
1)
Maximum number of devices to be
registered
9 devices
Frequency band
2.4 GHz band (2.4000 GHz -
2.4835 GHz)
Modulation method
FHSS (Freq Hopping Spread Spectrum)
Compatible BLUETOOTH profiles
2)
A2DP (Advanced Audio Distribution
Profile)
AVRCP (Audio Video Remote Control
Profile)
Supported Codecs
3)
SBC
4)
, AAC
5)
, LDAC
Transmission range (A2DP)
20 Hz - 40,000 Hz (LDAC sampling
frequency 96 kHz with 990 kbps
transmission)
20 Hz - 20,000 Hz (Sampling frequency
44.1 kHz)
1)
The actual range will vary depending on
factors such as obstacles between
devices, magnetic fields around a
microwave oven, static electricity,
cordless phone use, reception
sensitivity, the operating system,
software applications, etc.
2)
BLUETOOTH standard profiles indicate
the purpose of BLUETOOTH
communication between devices.
3)
Codec: Audio signal compression and
conversion format
4)
Abbreviation for Subband Codec
Additional Information
Sound Bar (HT-A3000)

Other manuals for Sony HT-A3000

Related product manuals