EasyManua.ls Logo

Sony HT-CT150 - Page 17

Sony HT-CT150
76 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
3 Press the input buttons to display the
input source in the front panel display.
4
Input source Playable component
TV TV, etc. connected to the TV
jack
BD Blu-ray Disc player, etc.
connected to the BD jack
DVD DVD player, etc. connected to
the DVD jack
SAT/CATV Satellite tuner or cable
television tuner, etc. connected
to the SAT/CATV jack
VIDEO DVD player, etc. connected to
the DIGITAL COAX IN
VIDEO jack
SA-CD/CD CD player, etc. connected to the
SA-CD/CD AUDIO IN jack
DMPORT Portable audio player, etc.
connected to the DMPORT jack
For video components, change the TV's
input to the HDMI input you chose in
step 3.
For details, refer to the operating
instructions of your TV.
Adjust the volume by pressing
MASTER VOL +/-.
k_
The sound may be output from the TV's speaker. In
this case, turn the volume of the TV's speaker clown
to mininmm.
Even if you playback Dolby True HD, Dolby Digital
Plus or DTS HD with a connected component
compatible with these sound formats, the system
accepts the signal as Dolby Digital or DTS. When you
playback these high-quality sound t_rmats, set the
connected component to outpnt the sound in multi-
channel PCM, if possible.
When you connect the video output jack of the
DIGITAL MEDIA PORT adapter to the video input
jack of the TV, set "CTRL HDMI" to "OFF" in the
AMP menu of the system (page 20). The images of a
component connected to the DIGITAL MEDIA
PORT adapter will not be played on the TV if "CTRL
HDMI" is set to "ON."
To enjoy the sound of a component without
displaying the images when "CTRL HDMI" is set to
"ON," turn off the TV first and then reset the power of
the system.
If you turn on the system first and then turn offthe
TV, all components connected to the TV will be
turned off because of the Control for HDMI function.
If you are using "BRAVIA" Sync
(One-Touch Play)
You do not need to perform steps 2 to 4 above.
When you turn on the connected components,
the system and the TV are also turned on. and the
input source changes automatically. You can
also adjust the system's volume using the TV's
remote.
For details on setting "BRAVIA" Sync, see
"Preparing for "BRAVIA" Sync" (page 19).
The system is not turned on when you turn the TV on
if sound was being output from the TV speakers the
last time the TV was turned off.
"10
€3
O
o
17GB

Other manuals for Sony HT-CT150

Related product manuals