3
GB
About This Manual
• The instructions in this manual are for model
HT-DDW1600. In this manual, models of area
code SP is used for illustration purposes unless
stated otherwise. Any difference in operation is
clearly indicated in the text, for example, “Models
of area code MX only”.
• The instructions in this manual describe the
controls on the supplied remote. You can also use
the controls on the receiver if they have the same
or similar names as those on the remote.
The HT-DDW1600 consists of:
• Receiver STR-K1600
• Speaker system
– Front speakers SS-MSP16
– Center speaker SS-CNP16
– Surround/Surround SS-SRP16
back speakers
– Sub woofer SA-WP16
This receiver incorporates Dolby* Digital and Pro
Logic Surround and the DTS** Digital Surround
System.
* Manufactured under license from Dolby
Laboratories.
“Dolby”, “Pro Logic”, “Surround EX”, and the
double-D symbol are trademarks of Dolby
Laboratories.
** “DTS” and “DTS-ES Neo:6” are registered
trademarks of DTS, Inc. “96/24” is a trademark
of DTS, Inc.
This receiver incorporates High-Definition
Multimedia Interface (HDMI
TM
) technology.
HDMI, the HDMI logo and High-Definition
Multimedia Interface are trademarks or registered
trademarks of HDMI Licensing LLC.
Note for the supplied remote
RM-AAU013 (Models of area code MX,
E51, AR only)
RM-AAU015 (Models of area code SP,
AU, TH only)
About area codes
The area code of the receiver you purchased is
shown on the lower right portion of the rear panel
(see the illustration below).
Any differences in operation, according to the area
code, are clearly indicated in the text, for example,
“Models of area code AA only”.
SURROUND BACK
SURROUND
CENTER
NT
L
L
R
RS
Area code
To Next Page
Loading...
