Help Guide
Sound Bar
HT-S2000
Setting the Wireless Function to On or Off
The wireless function is set to on by the default setting.
Touch
(Input) and (BLUETOOTH) on the bar speaker for about 5 seconds to turn off the BLUETOOTH and
Wireless LAN functions. [BT POWER] appears on the front panel display and then [OFF] appears.
Touch
(Input) and (BLUETOOTH) on the bar speaker again for about 5 seconds to turn on the BLUETOOTH
and Wireless LAN functions. [BT POWER] appears on the front panel display and then [ON] appears.
Note
You cannot perform the following operations when the wireless function is set to off:
Pairing and/or connecting with the BLUETOOTH device.
Connecting the optional rear speakers and/or subwoofer.
Using “Sony | Home Entertainment Connect.”
5-045-382-11(1) Copyright 2022 Sony Corporation
To Next Page
Loading...
