SERVICE MANUAL
Sony Home Entertainment &
Sound Products Inc.
Amplier section
S200F: US
POWER OUTPUT AND TOTAL HARMONIC
DISTORTION:
(FTC)
Front L + Front R:
With 4 ohms loads, both channels
driven, from 200 - 20,000 Hz; rated
15 W per channel minimum RMS
power, with no more than 1% total
harmonic distortion from 250 mW to
rated output.
POWER OUTPUT (reference)
Front L/Front R speaker: 25 W (per
channel at 4 ohms, 1 kHz)
Subwoofer: 30 W (at 4 ohms, 100 Hz)
Except S200F: US, CH
S200F: CH
POWER OUTPUT (rated)
Front L + Front R: 20 W + 20 W (at
4 ohms, 1 kHz, 1% THD)
POWER OUTPUT (reference)
Front L/Front R speaker: 25 W (per
channel at 4 ohms, 1 kHz)
Subwoofer: 30 W (at 4 ohms, 100 Hz)
Inputs
TV IN (OPTICAL)
USB
Outputs
HDMI OUT (TV (ARC))
USB section
(USB) port:
Type A (For connecting USB memory)
BLUETOOTH section
Communication system
BLUETOOTH Specication version 4.2
Output
BLUETOOTH Specication Power
Class 1
Maximum communication range
Line of sight approx. 25 m
1)
Frequency band (Except S200F: CH)
2.4 GHz band (2.4000 GHz -
2.4835 GHz)
Modulation method
FHSS (Freq Hopping Spread Spectrum)
Compatible BLUETOOTH proles
2)
A2DP (Advanced Audio Distribution
Prole)
AVRCP (Audio Video Remote Control
Prole)
Supported Codec
3)
SBC
4)
Transmission range (A2DP)
20 Hz - 20,000 Hz (Sampling frequency
32 kHz, 44.1 kHz, 48 kHz)
1)
The actual range will vary depending on
factors such as obstacles between
devices, magnetic elds around a
microwave oven, static electricity,
cordless phone use, reception
sensitivity, the operating system,
software applications, etc.
2)
BLUETOOTH standard proles indicate
the purpose of BLUETOOTH
communication between devices.
3)
Codec: Audio signal compression and
conversion format
4)
Abbreviation for Subband Codec
Speaker section
Speaker system
2-Way 3 Drivers Speaker System, Bass
reex
Speaker
Front L/Front R speaker: 46 mm (1 13/
16 in) cone type
Subwoofer: 70 mm (2 7/8 in) cone type
General
Power requirements (Except S200F: LA)
DC 19.5 V (using the supplied AC
adapter connected to AC 100 V - 240 V,
50 Hz/60Hz power supply)
Power consumption
On: 25 W
Standby mode: 0.5 W or less (Power
Saving mode)
(When Control for HDMI function and
BLUETOOTH Standby mode are set to
o)
Standby mode: 2 W or less*
(When Control for HDMI function and
BLUETOOTH Standby mode are set to
on)
* The system will automatically enter
Power saving mode when there is no
HDMI connection and no
BLUETOOTH pairing history.
Dimensions* (approx.) (w/h/d)
580 mm × 64 mm × 95 mm (22 7/8 in ×
2 5/8 in × 3 3/4 in)
* Not including projection portion
Mass (approx.)
2.3 kg (5 lb 2 oz)
Maximum output power (SF200/SF201)
≤ 6 dBm
S200F: CH
S200F: LA
Bar Speaker
SOUND BAR
9-896-481-03
2021B33-1
©
2021.02
US Model
Canadian Model
E Model
Chinese Model
HT-S200F
AEP Model
HT-SF200/SF201
UK Model
HT-SF200
Ver. 1.2 2021.02
Note:
Be sure to keep your PC used for service and
checking of this unit always updated with the
latest version of your anti-virus software.
In case a virus aff ected unit was found during
service, contact your Service Headquarters.
SPECIFICATIONS
HT-S200F/SF200/SF201
柵䋫剧♘
3/5!HI{!.!3/5946!HI{
⌵⭨∃䋫
Ŭ 31!eCn 濃FJSQ濄
∃䋫廷⅞ 濃栁⫾濄
ⵊ↱㇐⡔◌ 0 ⍗↱㇐⡔◌濕
31!X 濃5 㪋⤪㕚濇2!lI{濄
愱Ẳ杗杗䬕濕31!X 濃5 㪋⤪㕚濇
211!I{濄
Requisitos de alimentación
cc 19,5 V 4,36 A
(con adaptador de ca/cc)
Datos de alimentación del adaptador de
ca/cc
Entrada: ca 100-240 V 50/60 Hz 1,0 A
Salida: cc 19,5 V 4,36 A
– Continued on next page –
SYSSET
2021/02/1622:34:59(GMT+09:00)
To Next Page
Need help?
General
Weight and Dimensions
