42
GB
HT-SL55 4-247-583-14(1) GB
Sub woofer
• SA-WMSP70 for HT-SL70 and HT-SL65 only
• SA-WMSP50 for HT-SL60, HT-SL55 and
HT-SL50 only
• SA-WMSP40 for HT-SL40 only
S
peaker system Active subwoofer,
magnetically shielded
Speaker unit Woofer: 20 cm cone type
Enclosure type Acoustically Loaded Bass
Reflex
Continuous RMS power output
(6 ohms, 20 – 250 Hz)
SA-WMSP70/ 100 W
SA-WMSP50
SA-WMSP40 75 W
Reproduction frequency range
28 Hz – 200 Hz
High frequency cut-off frequency
150 Hz
Input LINE IN (input pin jack)
Power requirements
Area code Power requirements
CEL, CEK, SP 230 V AC, 50/60 Hz
Power consumption
SA-WMSP70/ 100 W
SA-WMSP50
SA-WMSP40 75 W
Dimensions (w/h/d) Approx. 270 × 325 ×
398 mm including front
panel
Mass
SA-WMSP70/ Approx. 10.0 kg
SA-WMSP50
SA-WMSP40 Approx. 9.0 kg
Supplied accessories
FM wire antenna (1)
AM loop antenna (1)
Remote commander RM-U40 (1)
R6 (size-AA) batteries (2)
Speakers
• Front speakers (2)
• Center speaker (1)
• Surround speakers (2)
• Sub woofer (1)
Speaker cords (long) (2)
Speaker cords (short) (3)
Speaker foot pads (20)
(HT-SL60, HT-SL55, HT-SL50 and HT-SL40 only)
Sub woofer foot pads (4)
Coaxial digital cord (1)
Monaural audio cord (1)
Colour label for speakers (5)
For details on the area code of the component you
are using, see page 4.
Design and specifications are subject to change
without notice.
Specifications (continued)
To Next Page
Loading...
