To Next PageTo Next Page
Need help?Do you have a question about the Sony HT-SF2000 and is the answer not in the manual?
General| Equalizer | Yes |
|---|---|
| RMS rated power | 1000 W |
| Audio output channels | 5.1 channels |
| Center speaker RMS power | 143 W |
| Preset stations quantity | 60 |
| Surround speaker weight | 2600 g |
| HDMI ports quantity | 3 |
Weight and Dimensions| Subwoofer weight | 5600 g |
|---|---|
| Center speaker weight | 600 g |
| Subwoofer dimensions (WxDxH) | 196 x 320 x 400 mm |
| Front speaker dimensions (WxDxH) | 300 x 1229 x 300 mm |
| Center speaker dimensions (WxDxH) | 260 x 80 x 91 mm |
Record model and serial numbers for future reference.
Explains the meaning of safety warning symbols used in the manual.
Instructions for disposing of old electronic equipment according to EU regulations.
Details manual scope, model coverage, and how to identify receiver area codes.
Identifies and explains the front panel controls and indicators of the receiver.
Explains the meaning and function of various indicators on the receiver's display.
Details the rear panel connections, inputs, and outputs for various components.
Introduces the remote control and its primary functions for operating the receiver and components.
Explains how to use input buttons to select components and their default assignments.
Illustrates correct speaker placement for HT-SF2000 and HT-SS2000 models.
Provides instructions for installing speakers on a flat surface or on a wall.
Details how to install speakers using speaker stands for better positioning.
Illustrates how to connect speaker cords to the receiver's speaker terminals.
Explains how to match speaker cords to receiver jacks and identify speaker types.
Shows how to connect audio components like CD players to the receiver's audio inputs.
Illustrates connecting video components like DVD players, recorders, and TVs to the receiver.
Describes HDMI as a digital interface for transmitting audio and video signals.
Illustrates connecting FM wire and AM loop antennas to the receiver.
Instructions for connecting the receiver's power cord to a wall outlet.
Guides through the initial setup and factory reset procedure for the receiver.
Instructions for inserting batteries into the remote commander, including precautions.
Pre-calibration steps, including speaker connection and setup considerations.
Step-by-step instructions for performing the automatic calibration process.
How to cancel the auto calibration process during operation.
How to confirm and save the results obtained from the auto calibration.
Lists common error codes during auto calibration and their corresponding remedies.
Explains warning codes displayed during auto calibration and provides guidance.
How to check the phase of each speaker during the calibration process.
Details the parameters available within the A. CAL menu for auto calibration settings.
Guides on using the test tone to adjust speaker levels and balance from the listening position.
How to select a component to play back using the remote or receiver input selector.
Step-by-step guide for playing Super Audio CDs or CDs.
Instructions for watching a DVD, including setup and playback steps.
Explains how to navigate through the receiver's amplifier menus for adjustments.
Summarizes parameters and initial settings for LEVEL, TONE, SUR, and TUNER menus.
Summarizes parameters and initial settings for AUDIO, VIDEO, and SYSTEM menus.
Details parameters within the LEVEL menu, including test tone, speaker balance, and levels.
Explains bass and treble level adjustments for front speakers in the TONE menu.
Details sound field selection and effect level adjustments in the SUR menu.
Explains FM station receiving modes (AUTO and MONO) in the TUNER menu.
Details digital audio input decoding priority settings in the AUDIO menu.
Explains HDMI audio output settings (AMP, TV+AMP) in the VIDEO menu.
Covers turning the HDMI CONTROL function on or off.
Details settings for front, center, surround, and subwoofer speaker distances.
Specifies surround speaker positions for CINEMA STUDIO EX modes.
Explains how to use Auto Format Direct mode for Dolby Digital and DTS surround sound.
Describes different Auto Format Direct (A.F.D.) modes and their effects.
How to select sound fields for movies or music using the remote control.
Explains the 2CH STEREO mode, outputting sound from front speakers and subwoofer only.
Guides on how to listen to FM and AM broadcasts using the built-in tuner.
How to perform automatic tuning to find radio stations.
How to tune into radio stations by directly entering their frequencies.
Instructions for storing and tuning to favorite radio stations using preset numbers.
How to select preset stations using the remote or receiver controls.
How to use the RDS feature to display additional information from FM radio stations.
How to cycle through and view RDS information like program service name and frequency.
Lists and describes various program type indications available via RDS.
How to select the audio input mode (AUTO IN, HDMI IN, COAX IN, OPT IN, ANALOG).
Instructions for connecting a DIGITAL MEDIA PORT adapter for audio playback.
How to safely disconnect the DIGITAL MEDIA PORT adapter from the receiver.
Steps to play audio from a component connected via the DMPORT.
How to reassign digital audio inputs (OPTICAL, COAXIAL) to other inputs.
Table showing available assignments for digital audio inputs.
How to set the receiver to turn off automatically at a specified time.
How to reassign input buttons on the remote to control different components.
Definitions of audio technologies like Dolby Digital, Pro Logic II, Surround, and DTS.
Definitions of HDMI, Sampling Frequency, and TSP (Time Stretched Pulse).
General safety guidelines for operating the receiver, including power sources and heat.
Guidelines on where to place the receiver and general operation precautions.
Advice on dealing with color irregularities on a nearby TV screen caused by magnetic shielding.
Solutions for common audio problems like no sound or low-level sound.
Steps to resolve issues where no sound is heard from a particular connected component.
Addresses problems like no sound from front speakers, center/surround, or subwoofer.
Solutions for when surround effects or Dolby/DTS multi-channel sound are not reproduced.
Addresses problems related to no picture or unclear pictures on the TV screen.
Solutions for poor FM reception, inability to tune stations, and RDS issues.
Steps to resolve problems with the remote control not functioning correctly.
Details power output and total harmonic distortion ratings for different area codes.
Provides specifications for stereo and surround mode power output for different area codes.
Details specifications for analog/digital inputs, FM/AM tuner ranges, and antenna.
Covers general power requirements, consumption, dimensions, mass, and speaker specifications for HT-SF2000.
Details speaker specifications for the HT-SS2000 model.
Lists all accessories supplied with the receiver.
