Types of A.F.D. mode
Decoding A.F.D. mode Multi channel Effect
mode [Display] audio after
decoding
(Detecting A.F.D. AUTO (Detecting Presents the sound as it was recorded/
automatically) [A.F.D. AUTO] automaticallv encoded without adding any sun'omad
effects. However, this receiver will
generate a low frequency signal for output
to the sub woofer when there is no LFE
signals.
Dolby Pro Logic PRO LOGIC 4 channel Performs Dolby Pro Logic decoding. The
[DOLBY PL] source recorded in 2 chmmel format is
decoded into 4.1 channels.
Performs Dolby Pro Logic II Movie modeDolby Pro Logic PRO LOGIC II MOVIE 5 channel
II [PLII MV] decoding. This setting is ideal for movies
encoded in Dolby Sm'round. In addition.
this mode can reproduce sound in 5.1
chalmel for watching videos of overdubbed
or old movies.
PRO LOGIC II M1JSI( 5 channel Performs Dolby Pro Logic II Music mode
[PLII MS] decoding. This setting is ideal for normal
stereo sources such as COs.
(Multi Stereo) MULTI STEREO (Multi Stereo Outputs 2 charnel left/right signals from
[MULTI ST.] all speakers.
m
o
e,
-,,I
o
e,
45_8
To Next Page
Loading...
