Switchingbetween
digitalandanalogaudio
(IN MODE)
You can select the audio input mode setting
when you connect components to both digital
and analog audio input jacks on the receiver.
1 Press AMP MENU.
"l-LEVEL" appears on the display.
2
3
4
5
6
Press #/_ repeatedly to select
"5-AUDIO".
Press (_) or. to enter the
menu.
Press #/+ repeatedly to select
"IN MODE".
Press (_) or. to enter the
parameter.
Press 4,/_ repeatedly to select
the audio input you want.
To return to the previous display
Press I,.
Audio input modes
• AUTO IN
Gives priority to digital audio signals when
there are both digital and analog connections.
If there are no digital audio signals, analog
audio signals are selected.
• HDMI IN
Specifies the audio signals input to the HDMI
jack.
• COAX IN
Specifies the digital audio signals input to the
DIGITAL COAX IN jack.
• OPT IN
Specifies the digital audio signals input to the
DIGITAL OPT IN jack.
• ANALOG
Specifies the analog audio signals input to the
AUDIO IN (L/R) jacks.
Note
Some audio input modes may not be set up
depending on the input.
54ss
To Next Page
Loading...
