Resettingsoundfields to
the initial settings
Be sure to use the buttons on the receiver for
this operation.
1,2 2
1 Press I/_ to turn off the
receiver.
2
While holding down SOUND
FIELD +, press I/_.
"S.F. CLR." appears on the display and
all sound fields are reset to their initial
setting.
Listeningto FM/AMradio
You can listen to FM and AM broadcasts
through the built-in tuner. Before operation.
make sm'e you have connected the FM and
AM antennas to the receiver {page 23).
Tip
The tuning scale for direct tuning differs depending
on the area code as shown in the following table. For
details on m'ea codes, see page 3.
Area code FM AM
U, UC 100 kHz 10kHz*
CEL. CEK 50 kHz 9 kHz
_The AM tuning scale can be chm_ged (page 66).
0
continued_
49_8
To Next Page
Loading...
