Selectinga component
MUTING
Press the input button to select
a component.
You can also use INPUTSELECTOR on
the receiver.
The selected inputappearson the display.
2
3
Selected input Components that can
[Display] be played back
DMPORT DIGITAL MEDIA PORT
[DMPORT] adapter connected to
DMPORT jack
VIDEO 1 V(R. etc.. connected to
[VIDEO 1] the VIDEO 1jack
VIDEO 2 Blu-ray disc player, etc.,
[VIDEO 2/BD]* connected to the VIDEO
2/BD jack
DVD DVD player, etc.,
[DVD] connected to DVD jack
SAT Satellite tuner, set-top
[SAT] box, etc., connected to
SAT jack
TV TV_ etc., connected to TV
[TV] jack
SA-(D/C D Super Audio (D/CD
[SA-CD/CD] player, etc., connected to
the SA-CD/CD jack
TUNER Built-in radio tuner
[FM or AM band]
_"VIDEO 2/BD" scrolls across the display,
then "VIDEO 2" appeaa's.
Turn on the component and
start playback.
Press MASTER VOL +/- to
adjust the volume.
You can also use MASTER VOLUME on
the receiver.
To mute the sound
Press MUTING.
The muting function will be canceled when
you do the following.
• Press MUTING again.
• Increase the volume.
• Turn off the receiver.
To avoid damaging your
speakers
Before you turn off the receiver, be sure to turn
down the volume level.
31Ge
To Next Page
Loading...
