Sony HT-ST9 - Using Control for HDMI (BRAVIA Sync)

Using
the
Control
for
HDMI
Function
for
"BRA
VIA"
Sync
This function
is
available
on
TVs
with the
I/
BRA
VIA"
Sync
function.
Operation
is
simplified
with the features
below
by connecting via
an
HOM
I cable
products manufactured by Sony that are compatible
with the Control
for
HDMI
function.
You
can
enable the
Control
for
HDMI
function by setting
[Control
for
HDMI]
to
[On]
(page
25).
amm
•To
use the
I/
BRA
VIA"
Sync
function,
be
sure
to
turn on the system and
all
connected devices after making the
HDMI
connection.
•
Depending on the settings
of
the connected device, the
Control
for
HDMI
function may
not
work correctly.
Refer
to
the operating
instructions
of
the device.
Control
for
HOM
I
-
Easy
Setting
You
can
set the system's
[Control
for
HDMI]
function
automatically
by
enabling
the corresponding setting on the
TV.
I/
DONE"
appears
in
the front
panel display
when the
Easy
Setting
is
completed.
-
You
can
set the [Control
for
HDMI]
function
manually
if
the above setting
is
not
working. For
details,
see
1/[HDMI
Settings]"
(page
25).
System Power
Off
When you turn
off
the
TV,
the system and the connected device will
turn
off
automatically.
-
The
system does
not
turn
off
automatically while playing
music on this
system.
One-Touch
Play
When you
play content on a device
(Biu-ray
Disc
Player,
I/PiayStation®4,"
etc.) connected to the system with
an
HDMI
cable,
the system and
TV
are turned on
automatically and the input
of
the
system
is
switched to the appropriate
HDMI
input.
amm
•
The feature above may
not
operate with certain devices.
•If
you set
[Standby
Through]
to
[Auto] or
[On]
(page
25),
and then
play
back the content on a connected device when the system
is
in standby
mode, sound and image
can
only
be
output
from the
TV
while the
system remains in standby mode.
System Audio
Control
If
you turn on the system
while
you are watching the
TV,
the
TV
sound
will
be
output
from the speakers
of
the system
automatically.
The
volume
of
the system
will
be adjusted when you adjust the
volume
using the TV's remote
control.
If the
TV
sound was
output
from the speakers
of
the system the
last
time you watched the
TV,
the system will
be
turned on automatically
when you turn on the
TV
again.
You
can
also
enjoy this feature when using the Twin Picture function
(Picture and Picture
(P&P))
on your
TV.
• If
the
[TV],
[HDMI1], [HDMI2] or
[HDMI3]
input
is
selected, the sound
can
be
output
from the system.
• If
other than
[TV],
[HDMI1], [HDMI2] or
[HDMI3]
input
is
selected, the
sound
is
only
output
from the
TV
when using the Twin Picture
function. When you turn
off
the Twin Picture function, the sound
is
output
from the system.
Audio Return
Channel
You
can
enjoy
TV
sound via the system by using just one
HDMI
cable.
For
details
of
the setting,
see
1/[Audio Return
Channel]"
(page
25)
0
...
::::T
tD
....
"T1
c:
::l
n
...
s·
::l
"'
continued---
31us