Sony HT-ST9 - Bluetooth and Wireless LAN Connectivity Issues

-+
Bring this system and
the
BLUETOOTH
device closer together.
-+
Pair this system and the
BLUETOOTH
device again. You may need
to
cancel the pairing with this system using your
BLUETOOTH
device first.
Pairing cannot be achieved.
-+
Bring this system and
the
BLUETOOTH
device closer together.
-+
Make sure this system
is
not
receiving interference
from
a wireless
LAN
device,
other
2.4
GHz
wireless devices, or a microwave oven.
If
a device
that
generates electromagnetic radiation
is
nearby,
move
the
device away
from
this system.
You cannot use
the
NFC
function.
-+
The
NFC
function
does
not
work
with
BLUETOOTH-compatible
receivers (such
as
headphones).
To
listen
to
sound using a
BLUETOOTH-compatible receiver, see
"Listening
to
Sound by
Transmitting
to
a BLUETOOTH-compatible Receiver" (page
13).
No sound
is
output
from
the
connected
BLUETOOTH
device.
-+
Make sure
that
the
indicator {blue)
of
the
Bar Speaker
is
lit
(page
11).
-+
Bring this system and
the
BLUETOOTH
device closer together.
-+
If
a device
that
generates electromagnetic radiation, such
as
a
wireless
LAN
device, other
BLUETOOTH
devices, or a microwave
oven
is
nearby, move the device away from this system.
-+
Remove any obstacle between this system and
the
BLUETOOTH
device
or
move
this system
away
from
the
obstacle.
-+
Reposition
the
connected
BLUETOOTH
de\/ice.
-+
Switch
the
wireless
LAN
frequency
of
any nearby Wi-Fi router or
PC
to
5
GHz
range.
-+
Increase
the
volume
on
the
connected
BLUETOOTH
device.
Network
connection
The system cannot connect
to
the
network.
-+
Check
the
network
connection (page
15)
and the
network
settings
(page 26).
Wireless
LAN
connection
You cannot connect
your
PC
to
the
Internet
after [Wi-Fi Protected
Setup (WPS)] is performed.
-+
The wireless settings
of
the
router
may
change automatically
if
you use
the
Wi-Fi Protected Setup
function
before adjusting
the
settings
of
the
router.
In
this case, change
the
wireless settings
of
your
PC
accordingly.
The system cannot connect
to
the
network
or
the
network
connection
is
unstable.
-+
Make sure
the
wireless
LAN
router
is
on.
-+
Check
the
network
connection (page
15)
and
the
network
settings
(page 26).
-+
Depending on
the
usage
environment
(including
the
wall
material), radio wave reception conditions,
or
obstacles between
the
system and
the
wireless
LAN
router,
the
possible
communication
distance may be shortened. Move
the
system and
the
wireless
LAN
router closer
to
each other.
-+
Devices
that
use a 2.4
GHz
frequency band, such
as
a microwave,
BLUETOOTH,
or digital cordless device,
may
interrupt
communication. Move
the
Bar Speaker away
from
such devices, or
turn
off
such devices.
-+
The wireless
LAN
connection may be unstable
depending
on
the
usage environment, especially while using
the
BLUETOOTH
function
of
the
system.
In
this case, adjust
the
usage environment.
The wireless
router
you
want
is
not
shown in
the
wireless
network
list.
-+
Press
BACK
to
return
to
the
previous screen, and
try
[Wireless
Setup{built-in)] again (page
16).
If
the wireless router you
want
is
still
not
detected, select [New connection registration]
from
the
network
list,
then
select [Manual registration]
to
input
a
network
name
(SSID)
manually.
::::J
.....
0
..,
3
Ql
...
cs·
::::J
continued
---
43us