60
<SDI OUT>
M11 (U17)
SDI OUT VF, MAIN
, RET, SD-SDI, OFF,
HD PROMPTER
HD PROMPTER is displayed when an HXCU-FB80 is
connected and OUTPUT FORMAT is not set to 1080/59.94P or
1080/50P
SD-SDI is not displayed in HD HDR mode
HD HDR signal when MAIN is selected, HD SDR signal in all
other cases
3G-LEVEL A, 3G-LEVEL B,
HD-SDI
HD-SDI is displayed when an HXCU-FB80 is connected and
OUTPUT FORMAT is set to 1080/59.94P or 1080/50P
CHARACTER ON, OFF
Displayed when SDI OUT is not set to VF.
EMB AUDIO MIC, PGM, OFF
When MIC is selected:
(1-MIC1 2-MIC2)
When PGM is selected: Depends on system configuration.
In standalone operation mode:
(1-SDI1 2-SDI2)
(3- 4- )
When the HXCU-FB80 is connected:
(1-PGM 2- )
(3-ENG 4-PROD)
When the CA-TX70 is connected:
(1-PGM 2- )
(3-INCOM 4- )
SDI IN/OUT HD TRUNK IN
, HD PROMPTER
OUT, (HD PROMPTER OUT)
Displayed when an HXCU-FB80 is connected and OUTPUT
FORMAT is not set to 1080/59.94P or 1080/50P
(HD PROMPTER OUT): Displayed when OUTPUT
FORMAT is set to 1080/59.94P or 50P (not configurable)
FRAME
SYNCRO
ON, OFF
DOWN
CONVERTER
Displayed when SDI OUT is SD-SDI.
SELECT MAIN
, RET, VF
ASPECT SQ
, EC
<TRUNK>
M12 (U18)
TRUNK ON
, OFF, (OFF) (OFF): Displayed when in standalone operation mode (not
configurable)
IF 232C
, 422A, SUB CMD
<GENLOCK>
M13
REFERENCE CCU, INTERNAL, GENLOCK Display only
GENLOCK ENABLE
, DISABLE Displayed in standalone operation mode
STATUS
FORMAT
PHASE V: −1024 to 1023 0
H: −1700 to 1700 0
<DATE>
M14
DATE/TIME 31 to 00, 12 to 01, 2099 to 2000, 23
to 00, 59 to 00
FILE TIMESTAMP
FORMAT
1 Y/Mn/D, 2 Mn/D, 3 D/M/Y,
4 D/M, 5 M/D/Y
, 6 M/D
Y: Year
Mn: Month (numeric)
M: Month (character string)
D: Day
<BATTERY ALARM>
M15
BEFORE END 11.5V
to 17.0V
END 11.0V
to 11.5V
MAINTENANCE
Page name
Page No.
Item Setting Description / Remarks
To Next Page
