Need help?Do you have a question about the Sony HXCU-TX70 and is the answer not in the manual?
General| Brand | Sony |
|---|---|
| Model | HXCU-TX70 |
| Category | Control Unit |
| Language | English |
Describes the manual's purpose for service and engineers.
Lists other manuals available for the unit.
Lists trademarks and registered product names.
Illustrates how to connect the CCU, camera, and peripherals for system operation.
Configuration and adjustment of intercom and microphone systems for optimal audio.
Adjustments for input/output selection, signal phase, and aspect ratio conversion for video.
Identifies the physical locations of all circuit boards within the unit.
Covers battery replacement, flexible wires, PLD data, periodic parts, protection, and onboard parts.
Procedures for updating the main and boot programs using a Memory Stick.
Guidelines for replacing boards, including EEPROM data, and lead-free solder usage.
Explanations of major boards like DM-152, DPR-361, and power supply.
Procedures for starting, exiting, and changing settings within the maintenance mode.
Details on the VE Operation menu for managing reference, lens, and scene files.
Guides on using the Maintenance menu for serial number settings and firmware updates.
Overview of mechanical and circuit board replacement, including torque specs and notes.
Steps for replacing the top cover and front assembly of the unit.
Procedures for replacing major boards like DM-152, PS-739D, and DPR-361.
Instructions for replacing the DC fan and the rear assembly.
Lists required equipment, related gear, and essential precautions before performing adjustments.
Procedure to check and adjust RTS intercom sidetone cancellation for optimal audio.
Adjustments for VCO, stair case signals, SD, and HD signal levels.
Adjustments for modulation, demodulation, and tone detection in the TRIAX system.
Notes on safety components, part standardization, stock, and harnesses.
Detailed exploded views of top cover, front panel, power, chassis, and rear panel assemblies.
Lists the accessories supplied with the HXCU-TX70 and HKCU-FP2 units.
Overall block diagram showing component interconnections and signal flow.
Detailed block diagram illustrating DM-152, FL-378, and CT-257D board interconnections.
Block diagram showing HKCU-FP2 panel and AU-358 board connections.
Complete frame wiring diagram illustrating all connections between assemblies and interfaces.
To Next Page
