To Next PageTo Next Page
Need help?Do you have a question about the Sony HXR-MC88 and is the answer not in the manual?
General| Image Processor | BIONZ X |
|---|---|
| Lens | Carl Zeiss Vario-Sonnar T* |
| Optical Zoom | 12x |
| Image Stabilizer | Optical SteadyShot |
| NFC | Yes |
| Microphone | Built-in stereo microphone |
| Sensor Type | Exmor R CMOS |
| Effective Pixels | 8.3 MP |
| Focal Length (35mm equivalent) | 29.0 - 870.0 mm |
| Maximum Aperture | F1.8-F2.8 |
| ND Filter | Yes (1/4, 1/16, 1/64) |
| Shutter Speed | 1/6 - 1/10, 000 sec |
| White Balance | Auto, Indoor, Outdoor, One Push, Manual |
| Video Resolution | 1920 x 1080 |
| Recording Format (Video) | AVCHD, MP4 |
| Recording Format (Audio) | Dolby Digital 2ch, Linear PCM 2ch |
| Recording Media | SD/SDHC/SDXC memory card |
| LCD Screen | 3.0 inch |
| LCD Screen Resolution | 1.56M dots |
| Viewfinder | 0.39-inch OLED |
| Audio Input | XLR input |
| Video Output | HDMI, Composite |
| Headphone Output | Stereo mini jack (3.5mm) |
| DC Input | DC 8.4V |
| Remote | Yes |
| Wi-Fi | Yes |
| Weight (Body) | 1.1 kg |
| Weight (with battery and memory card) | Approx. 1.3 kg |
General precautions and procedures for replacing parts and printed wiring boards.
Essential data handling steps before and after replacing the VC-1045 board.
Procedures for writing WB adjustment values when replacing the EVF or VC-1045 boards.
Steps to obtain and write imager DRA data when replacing the VC board or lens.
Steps to record and write sensitivity for the angular velocity sensor.
Warning and procedure for replacing blown fuses, emphasizing safety precautions.
Detailed instructions for connecting and disconnecting flexible flat cables.
Procedures for safely connecting and disconnecting coaxial cables.
Explains the unit's self-diagnosis feature, error codes, and board functions.
Lists self-diagnosis codes, symptoms, and their corresponding corrections.
Provides solutions for specific shift lens errors encountered during operation.
Addresses errors related to the Steadyshot IC, suggesting board or lens replacement.
Explains troubleshooting for shift lens overheating in the pitch direction.
Explains troubleshooting for shift lens overheating in the yaw direction.
Details troubleshooting for thermistor abnormalities in the lens system.
Instructions for removing and installing the main lens assembly.
Instructions for removing and installing the main lens assembly.
Steps for removing and installing the 1 group lens assembly.
Procedures for disassembling and reassembling the Z Nut mechanism.
Steps for disassembling and reassembling the P Frame Moving Assembly.
Covers disassembly and reassembly procedures for the handle section.
Outlines the requirements and procedures for electrical adjustment using Adjust Station.
Explains the PD-1054 board's role in LCD signal conversion and touch panel detection.
Describes the VF-1021 board's function in EVF signal conversion and power generation.
Describes components of the MS-1037 board for memory card interface and sensors.
Explains the MS-1037 board's gyro-sensor for detecting shake and its signal path.
Describes the VC-1045 board's main system components.
Describes the VC-1045 board's main system components, including power supply and control.
Exploded view of the lens block components and their part numbers.
Exploded views of the lens assembly (parts 1-2) and selection parts.
Power block diagrams detailing voltage sources, regulators, and converters (parts 1/5 to 5/5).
