Sony ICD-P520 - Adding and Overwriting Recordings

ICD-P520 GB 3-097-346-12 (1)
19
GB
Various Recording Modes
Various Recording Modes
Adding a Recording
Using an adding recording
At a factory setting, you cannot add a
recording not to erase the message by
accidental operation. If you want to add
a recording to a previously recorded
message or add an overwrite recording,
change the REC-OP setting in the
procedures below.
1 Press MENU/DISPLAY for more than
1 second until “MODE” appears in
the display window.
2 Press –  or + to display
“REC-OP” and press PLAY/
STOP.
The adding recording window will be
displayed.
3 Press –  or + to select “ON”
and press PLAY/STOP.
The setting is changed.
4 Press –  or  + to select
“ADD” or “OVER” and press
 PLAY/STOP.
• ADD: adds a recording to a
previously recorded message
• OVER: adds an overwrite recording.
5 Press  STOP to exit the menu mode.
To prohibit to add a recording
In step 3, select “OFF” and press
NxPLAY/STOP.