When [Focus Area] is [Center] or [Flexible Spot], the frames in the focus area
that is in focus turn green, regardless of the [Disp. cont. AF area] settings.
[81] How to Use Using shooting functions Adjusting the focus
Focus Settings
Sets up the focus functions.
1. MENU → (Camera Settings) → [Focus Settings].
2. Perform settings using the front/rear dial or control wheel.
When the focus mode is set to [Autofocus]/[DMF]
Front dial: Moves the focus area frame up/down.
Rear dial: Moves the focus area frame right/left.
Control wheel: Selects the focus area.
When the focus mode is set to [Manual Focus]
You can set the area to be magnified when focusing manually.
Front dial: Moves the area to be magnified up/down.
Rear dial: Moves the area to be magnified right/left.
Control wheel: Moves the area to be magnified up/down.
Note
You can move the focus area when [Focus Area] is set to the following:
[Zone]
[Flexible Spot]
[Lock-on AF: Zone]
[Lock-on AF: Flexible Spot]
[82] How to Use
Using shooting functions Adjusting the focus
AF w/ shutter (still image)
To Next Page
Loading...
