Menu item details
On:
The movie playback demonstration starts automatically if the product is not
operated for about one minute. Only protected AVCHD movies are played back.
Set the view mode to [AVCHD View], and protect the movie file with the oldest
recorded date and time.
Off (default setting):
Does not show the demonstration.
Note
You can set this item only when the product is powered by the AC-PW20 AC
Adaptor (sold separately).
Even if [On] is selected, the product does not start a demonstration if there is no
movie file on the memory card.
When [On] is selected, the product does not switch to power save mode.
[201] How to Use Changing settings Setup menu
TC/UB Settings
The time code (TC) and the user bit (UB) information can be recorded as data
attached to movies.
1. MENU→ (Setup) → [TC/UB Settings] → setting value you want to
change.
Menu item details
TC/UB Disp. Setting:
Sets the display for the counter, time code, and user bit.
TC Preset:
Sets the time code.
UB Preset:
Sets the user bit.
TC Format:
To Next Page
