What to do if I cannot reset the pan/tilt on Sony ILME-FR7 Digital Camera?
If you cannot reset the pan/tilt on your Sony Digital Camera, check if the pan/tilt lock lever is in the LOCK position. If so, slide it to the UNLOCK position.
What to do if no image is output or is distorted when using external sync on Sony ILME-FR7?
If there's no image output or the image is distorted when using external sync on your Sony Digital Camera, it's likely that an external sync signal suitable for the configured video signal format is not being input. Input an external sync signal suitable for the configured video signal format.
General| Brand | Sony |
|---|---|
| Model | ILME-FR7 |
| Category | Digital Camera |
| Language | English |
Explains controlling cameras via LAN using VISCA on IP-capable controllers.
Defines VISCA commands, inquiries, replies, and device setting commands.
Details how to cancel commands that have been sent but not yet executed.
Describes ACK, completion, and error messages returned by the unit.
Details the protocol for general VISCA commands, including ACK and completion messages.
Explains the protocol for VISCA inquiry commands, noting the absence of ACK messages.
Details the ACK and Completion messages issued by the camera when commands are accepted or executed.
Lists common error messages like Syntax Error, Command Buffer Full, and Command Not Executable.
Explains limitations on peripheral and controller addresses locked to 1 and 0 respectively.
Details commands for controlling the Neutral Density (ND) filter settings.
Commands related to iris control, including AUTO IRIS and manual adjustments.
Commands for controlling gain (AGC) and shutter speed (AUTO SHUTTER).
Commands for managing auto exposure, backlight, and spotlight compensation.
Commands for controlling zoom speed, resolution, position, and focus mode/speed/position.
Detailed commands for controlling pan and tilt movement, speed, and position.
Commands for home, reset, ramp curve, speed step, speed mode, and limit settings for pan-tilt.
Commands for controlling the multi-function dial's GUI cursor and setting application.
Provides hexadecimal values for various settings like ND filter and pan/tilt positions.
To Next Page
