Help Guide
Interchangeable Lens Digital Camera
ILME-FX30
Fn Menu Settings
The Function menu is a menu of 12 functions that is displayed at the bottom of the screen when you press the Fn
(Function) button in the shooting mode.
You can register 12 functions to the Function menus for still image shooting and movie shooting, respectively.
The following is the procedure for changing [Drive Mode] in the still image function menu to [
Grid Line Display].
To change the movie function menu, select a movie function menu item in Step 2.
Hint
When [Touch Operation] is set to [On], you can also open [Fn Menu Settings] by holding down the icon in the function menu.
Related Topic
Using the function menu
5-043-036-11(1)
Copyright 2022 Sony Corporation
MENU →
(Setup) → [Operation Customize] → select [Fn Menu Settings].
1
Select
(Drive Mode) from among the 12 still image function menu items using the top/bottom/left/right
side of the control wheel, and then press the center.
2
Move to the screen showing [ Grid Line Display] using the left/right side of the control wheel. Then,
select [
Grid Line Display] and press the center of the control wheel.
( Grid Line Display) will be displayed in the former location of (Drive Mode) in the Function
menu.
3
To Next Page
Loading...
Need help?
General
