Withdrawal of 41P & 51P FFC using non-ZIF from panel side (JAE Connector)
Withdrawal of 41P & 51P FFC using non-ZIF from panel side (Yeonho Connector)
Initial condition
2
PULL
1
Step 1 & 2
1
PUSH
PUSH
Pull-out FFC in straight direction while pushing side-release
lock buttons at the same time.
Push the side-release lock buttons inward (highlighted in red).
2
Note: FFC as in image is only for reference purpose. Actual
FFC outlook may vary by each vendor.
Initial condition
Step 1 & 2
2
PULL
1
1
PUSH
PUSH
Pull-out FFC in straight direction while pushing side-release lock buttons at
the same time.
Push the side-release lock buttons inward (highlighted in red).
2
1
1
Note: FFC as in image is only for reference purpose. Actual
FFC outlook may vary by each vendor.
APPENDIX
FFC REPLACEMENT CAUTIONS
TOOLS & EQUIPMENTS FFC PRECAUTIONS SECTION 1 SECTION 2 SECTION 3 SECTION 4 SECTION 5 SMART CORE APPENDIX
SYSSET
2022/02/2522:04:10(GMT+09:00)