The message [3D signal is detected.] automatically appears when 3D signal is
detected. (3D models only) [122]
A message about an app asking for permission to access a TV function is displayed.
[123]
The screen becomes darker after a certain period of time. (only models equipped
with an OLED panel) [124]
The message [Panel refresh did not finish] is displayed. (only models equipped with
an OLED panel) [125]
You are concerned about an image retention. (only models equipped with an OLED
panel) [126]
A white line appears on the screen. (only models equipped with an OLED panel)
[127]
Panel refresh does not complete. (only models equipped with an OLED panel) [128]
Keyboard [129]
Broadcast reception [130]
Check these things first to troubleshoot your TV reception. [131]
Block noise or an error message appears and you cannot watch broadcasts. [132]
Ghosting or double images appear. [133]
Only snow noise or a black picture appears on the screen. [134]
There is picture or sound noise when viewing an analogue TV channel. [135]
Some channels are blank. [136]
Poor reception or poor picture quality with digital broadcasts. [137]
You cannot view digital channels. [138]
Not all analogue channels are tuned. [139]
You cannot view satellite channels. (Satellite compatible models only) [140]
Some digital channels are missing. [141]
You want to tune your satellite dish. [142]
Sound [143]
No sound but good picture. [144]
Audio noise. [145]
No audio or low audio with a home theatre system. [146]
Distorted sound. [147]
You want to output sound from both the headphones/Bluetooth audio device/audio
system and the TV speakers. [148]
Headphone/Bluetooth audio device volume cannot be adjusted. [149]
You are concerned about a delay between the picture and sound. [150]
Network (Internet/home)/apps [151]
To Next Page