To Next PageTo Next Page
Need help?Do you have a question about the Sony KDL-32L4000 and is the answer not in the manual?
General| Audio system | B/G, D/K, I, L, NICAM |
|---|---|
| RMS rated power | 20 W |
| Number of speakers | 2 |
| Plug and Play | Yes |
| Comb filter | Digital |
| Display diagonal | 32 \ |
| Display resolution | 1366 x 768 pixels |
| Display technology | LCD |
| Native aspect ratio | 16:9 |
| Viewable size diagonal | 810 mm |
| Contrast ratio (dynamic) | 15000:1 |
| RF ports quantity | 1 |
| Headphone connectivity | 3.5 mm |
| Product color | Black |
| Power consumption (standby) | 0.5 W |
| Power consumption (typical) | 155 W |
| Tuner type | Analog & digital |
| Analog signal format system | PAL, Secam |
Weight and Dimensions| Depth (with stand) | 242 mm |
|---|---|
| Width (with stand) | 807 mm |
| Height (with stand) | 585 mm |
| Weight (with stand) | 15000 g |
| Depth (without stand) | 101 mm |
| Height (without stand) | 548 mm |
| Weight (without stand) | 13000 g |
Lists items included with the product.
Lists items available for separate purchase.
Important safety notices for service personnel.
Guidelines to prevent injury when moving the television set.
Steps to avoid damaging the LCD panel during service.
Procedure to test for AC leakage currents.
Steps to ensure safety after completing service.
Methods for measuring AC leakage current.
Explanation of the TV's self-diagnostic capabilities.
Interprets LED indicators and blinking patterns for fault diagnosis.
Procedures for accessing the TV's diagnostic information.
Steps to restore TV settings to their original factory default state.
Steps to remove the television's rear cover.
Steps to remove the switch unit containing the H1 board.
Steps to remove the side jack bracket and BM4 board.
Steps to remove the G1D or G2D power unit board.
Steps to remove the table-top stand assembly.
Steps to remove structural frames and VESA mounting brackets.
Steps to remove speakers, HM6 board, and light guide.
Steps to remove and clean the LCD panel.
Steps to remove the inverter board.
General view of wire management for the 32L4000 model.
Specific instructions for routing LVDS, HM6, Speaker, and Inverter cables.
Instructions for dressing cables on G1D and H1 boards.
General view of wire management for the 37L4000 model.
Specific instructions for routing LVDS, HM6, Speaker, Inverter, and Ground cables.
Instructions for dressing cables on G2D board.
Identifies boards and explains schematic conventions.
Illustrates the overall system architecture and data flow.
Detailed schematics and component layout for the BM4 board.
Schematics and component layout for the G1D board (32L4000).
Schematics and component layout for the G2D board (37L4000).
Schematics and component layout for the HM6 board.
Lists various semiconductor part numbers and types.
Exploded view and parts list for rear cover and stand.
Exploded view and parts list for the TV chassis.
Lists and identifies various internal connectors and their part numbers.
Exploded view and parts list for bezel, panel, and speakers.
Lists all screws used in the assembly and their quantities.
Detailed list of BM4 board components (capacitors, resistors, etc.).
Parts list for G1D, G2D, and HM6 boards.
Guidelines for handling and replacing encryption key components.
Information on how to obtain complete tiled schematic diagrams.
