Do you have a question about the Sony KDL-32V5500 and is the answer not in the manual?
Audio system | B/G, D/K, Ik, L, NICAM |
---|---|
RMS rated power | 20 W |
Number of speakers | 2 |
Integrated clock | Yes |
Tilt angle range | -20 - 20 ° |
Headphone connectivity | 3.5 mm |
Comb filter | Digital |
Display diagonal | 32 \ |
Display technology | LCD |
Native aspect ratio | 16:9 |
Viewable size diagonal | 810 mm |
Contrast ratio (dynamic) | 60000:1 |
HDMI ports quantity | 4 |
USB 2.0 ports quantity | USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them. |
Product color | Black |
Panel mounting interface | 200 x 200 mm |
Power consumption (standby) | 0.17 W |
Power consumption (typical) | 109 W |
Tuner type | Analog & digital |
Analog signal format system | NTSC 3.58, PAL, Secam |
Depth (with stand) | 259 mm |
---|---|
Width (with stand) | 798 mm |
Height (with stand) | 584 mm |
Weight (with stand) | 14500 g |
Depth (without stand) | 89 mm |
Height (without stand) | 536 mm |
Weight (without stand) | 12000 g |
Lists the specific TV models covered by this manual, including their chassis type.
Discusses lead-free solder usage, its properties, and necessary handling precautions.
Safety advisory regarding the correct fuse rating and replacement for UK mains plugs.
Warning regarding the care and handling of the LCD panel during service.
Details power requirements, screen sizes, resolution, and power consumption for various models.
Physical dimensions and weight specifications for different TV models.
Lists connector types, audio/video capabilities, and PC signal references.
Details pinouts for SCART, HDMI, and D-Sub PC connectors.
Explains LED error codes and how to access the self-diagnostic screen.
Instructions for removing covers, stand, and loudspeaker.
Steps for removing major internal boards like BA, D5, D6, G2.
Steps for removing boards G4, G5, HL1A, HSN.
Steps for removing IP1 and IP2 boards.
Instructions for entering service mode and managing TVM data.
Overall system block diagram illustrating major components and their connections.
Definitions for component designators and notes on schematic diagrams.
Schematic details of the BA board's tuner, microcontroller, and input sections.
Schematic diagram for the D5 inverter component.
Schematic diagram for the D6 inverter component.
Schematics for the HL1A LED indicator and HSN light/IR sensor.
Schematic details for the IP1 board's inverter and power supply.
Schematic details for the IP2 board's inverter and power supply.
Component placement diagram for the BA board, side A.
Component placement diagram for the BA board, side B.
Component placement diagram for the HL1A board.
Component placement diagram for the D5 board.
Component placement diagrams for the D6 and HSN boards.
Component placement diagram for the IP1 board, side A.
Component placement diagram for the IP1 board, side B.
Component placement diagram for the IP2 board, side A.
Component placement diagram for the IP2 board, side B.
Exploded view of the TV chassis with part references.
Detailed list of chassis components with part numbers and remarks.
Exploded view and parts list for the TV bezel assembly.
Exploded view and parts list for the rear cover and power supply cords.
Index to the detailed parts lists for various boards and components.
List of capacitors used on the BA board, including part number and value.
List of resistors used on the BA board, including part number and value.
List of ICs, filters, fuses, and ferrite beads for the BA board.
List of inductors, transistors, and sockets for the BA board.
Parts list for HL1A LED board and HSN light/IR sensor board.
Lists part numbers for various connectors and available instruction manuals.
Instructions for inserting and locking the HIROSE MDF 61 connector.
Instructions for releasing and detaching the HIROSE MDF 61 connector.
Step-by-step guide for removing the TV's rear cover.
Step-by-step guide for installing the TV's rear cover.