To Next PageTo Next Page
Need help?Do you have a question about the Sony KDL-32R420A and is the answer not in the manual?
General| Screen shape | Flat |
|---|---|
| Response time | - ms |
| Display diagonal | 32 \ |
| Display brightness | - cd/m² |
| Display resolution | 1366 x 768 pixels |
| Native aspect ratio | 16:9 |
| Native refresh rate | 50 Hz |
| LED backlighting type | Direct-LED |
| Supported video modes | 1080i, 1080p, 480i, 480p, 576i, 576p, 720p |
| Contrast ratio (dynamic) | 1000000:1 |
| Display diagonal (metric) | 80 cm |
| Screen format adjustments | 14:9, Auto, Zoom |
| Motion interpolation technology | Motionflow 100 Hz |
| 3D | No |
| Volume control | Digital |
| Placement supported | Horizontal |
| Headphone connectivity | 3.5 mm |
| Annual energy consumption | 58.4 kWh |
| Teletext function | - |
| Tuner type | Analog & digital |
| Digital signal format system | DVB-C, DVB-T |
| RMS rated power | 16 W |
| Number of speakers | 2 |
| Equalizer bands quantity | 5 |
| DVI-D ports quantity | 0 |
| USB 2.0 ports quantity | 1 |
| Consumer Electronics Control (CEC) | BRAVIA Sync |
| Smart modes | Cinema, Game, Standard, Vivid |
| Product color | Aluminium, Black |
| Power consumption (max) | 58 W |
| Power consumption (standby) | 0.5 W |
| Power consumption (typical) | 40 W |
| Package depth | 149 mm |
| Package width | 876 mm |
| Package height | 508 mm |
| Cables included | AC |
Weight and Dimensions| Depth (with stand) | 171 mm |
|---|---|
| Height (with stand) | 466 mm |
| Weight (with stand) | 5300 g |
| Depth (without stand) | 76 mm |
| Width (without stand) | 731 mm |
| Height (without stand) | 441 mm |
| Weight (without stand) | 5100 g |
Details original manual issue and subsequent corrections.
Covers general cautions, electric shock, TV handling, and component warnings.
Procedures to ensure safety before releasing the set to the customer.
Interpreting STANDBY LED flash counts for problem diagnosis.
Procedure to view stored failure occurrence data and results.
Disassembly and parts list for stand shaft and under cover.
Procedure to enter service mode using the remote commander.
Flowchart for diagnosing and resolving no power issues.
Troubleshooting based on standby LED blink patterns.
Flowchart for diagnosing and resolving no picture issues.
Troubleshooting steps for no sound issues.
Troubleshooting for TV button malfunctions.
Overall block diagram of the TV system.
Diagram showing board and connector relationships.
Instructions for Keypad wire dressing.
Instructions for PSU to MB wire dressing.
Instructions for Speaker and GND combine wire dressing.
Instructions for IR wire dressing.
Specific placement of tapes, cushions, and gaskets for different components.
How to check the TV's software version.
Step-by-step guide for updating TV software using a USB drive.
