Do you have a question about the Sony KDL-40HX750 and is the answer not in the manual?
Display diagonal | 40 \ |
---|---|
Native aspect ratio | 16:9 |
Native refresh rate | 60 Hz |
LED backlighting type | Edge-LED |
Supported video modes | 1080i, 1080p, 480i, 480p, 576i, 576p, 720i, 720p |
Contrast ratio (dynamic) | 100000000:1 |
Display diagonal (metric) | 102 cm |
Supported graphics resolutions | 1920 x 1080 (HD 1080) |
Motion interpolation technology | Motionflow 400 Hz |
3D | Yes |
3D type | Active |
Annual energy consumption | 92 kWh |
Product color | Black |
VESA mounting | - |
Tuner type | Analog & digital |
Digital signal format system | DVB-C, DVB-T |
Audio system | Dolby Digital / Dolby Digital Plus / Dolby Digital Pulse |
RMS rated power | 20 W |
Number of speakers | 2 |
DVI port | No |
HDMI ports quantity | 4 |
DVI-D ports quantity | 0 |
USB 2.0 ports quantity | USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them. |
Component video (YPbPr/YCbCr) in | 1 |
Browser supported | Opera |
Smart modes | Cinema, Personal, Photo, Sports, Standard, Vivid |
Number of OSD languages | 29 |
AC input voltage | 100 - 220 V |
AC input frequency | 50 - 60 Hz |
Power consumption (max) | 119 W |
Power consumption (standby) | 0.25 W |
Power consumption (typical) | 66 W |
Cables included | AC |
Operating temperature (T-T) | 5 - 35 °C |
Depth (with stand) | 241 mm |
---|---|
Height (with stand) | 596 mm |
Weight (with stand) | 13900 g |
Depth (without stand) | 59 mm |
Width (without stand) | 943 mm |
Height (without stand) | 578 mm |
Weight (without stand) | 11800 g |
Safety precautions for handling the LCD panel to prevent damage.
Instructions and warnings for cleaning the LCD panel safely and effectively.
Post-repair safety checks, including AC leakage testing.
Method for verifying proper earth grounding for AC outlets.
Overview of the BRAVIA HX75x series LED LCD HDTV with 3D capabilities.
Technical specifications for system, channel coverage, panel, speakers, and I/O jacks.
Describes the layout and primary circuits of the AZ3F chassis.
Details the functions of major circuit boards like Main, Power Supply, IR, and TCON.
Introduction to troubleshooting and the role of software updates.
Explains TV monitoring, error codes, and Standby LED blink patterns.
How to access and interpret past error codes and dates recorded by the TV.
A chart to help identify potential causes of errors based on symptoms.
A block diagram illustrating the main functional units of the TV.
Flowcharts for diagnosing common issues like no power, picture, video distortion, and 3D.
Instructions for removing the TV stand and rear cover.
Procedures for handling connectors and removing internal boards/panel.
Lists part numbers for screws, connectors, boards, and accessories.
Explains the importance and methods for updating TV software for customers and servicers.
Steps for setting model/destination, entering serial number, and confirming IDs.
Procedures for clearing self diagnosis data and performing optional picture adjustments.