To Next PageTo Next Page
Need help?Do you have a question about the Sony KDL-46W4000 and is the answer not in the manual?
General| Noise reduction | Yes |
|---|---|
| Product color | Black |
| LED indicators | Stand-by |
| Panel mounting interface | 300 x 300 mm |
| Headphone connectivity | 3.5 mm |
| Equalizer | No |
| RMS rated power | 20 W |
| Sound output mode | Dynamic/Standard/BBE ViVA/Virtual Dolby |
| Number of speakers | 2 |
| Zoom capability | 14:9, 4:3 |
| Display diagonal | 46 \ |
| Display brightness | 500 cd/m² |
| Native aspect ratio | 16:9 |
| Contrast ratio (dynamic) | 33000:1 |
| Tuner type | Analog & digital |
| Analog signal format system | NTSC, PAL, Secam |
| HDMI ports quantity | 3 |
| USB 2.0 ports quantity | USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them. |
| Digital audio optical out | 1 |
| Remote control type | RM-ED011 |
| Power consumption (standby) | 0.19 W |
| Power consumption (typical) | 225 W |
Weight and Dimensions| Depth (with stand) | 307 mm |
|---|---|
| Width (with stand) | 1120 mm |
| Height (with stand) | 782 mm |
| Weight (with stand) | 29000 g |
| Depth (without stand) | 115 mm |
| Height (without stand) | 742 mm |
| Weight (without stand) | 25000 g |
Details on circuit boards processed using Lead Free Solder and precautions.
Steps for removing external components like covers, stands, and speakers.
Instructions for safely removing internal circuit boards such as BE1, D4, D5, G1D, G5, H3E, H4, and IP5.
How to enter, navigate, and adjust settings in the service mode.
Details on Set-up, Sound, IF Adjust, and White Balance settings.
Viewing error codes and operating the TT Mode for service.
Overview of the TV's internal component connections and signal flow.
Diagram showing the physical location of circuit boards within the TV.
Reference for detailed electronic schematics and board layouts.
Diagram showing the breakdown of the TV chassis with numbered parts.
Identification and part numbers for the TV bezel.
Information on rear covers and power supply cords.
List of components for the BE1 main board.
List of components for H3E and H4 boards.
List of included accessories and connectors.
Information for the RM-ED011 remote commander.
