Need help?Do you have a question about the Sony KDL-46W5500 and is the answer not in the manual?
General| Audio system | B/G, D/K, I, L, NICAM |
|---|---|
| RMS rated power | 20 W |
| Number of speakers | 2 |
| Noise reduction | Yes |
| Product color | Black |
| Panel mounting interface | 300 x 300 mm |
| Display diagonal | 46 \ |
| Display brightness | - cd/m² |
| Display technology | LCD |
| Native aspect ratio | 16:9 |
| Supported video modes | 1080i, 1080p, 480p, 576i, 576p, 720p |
| Viewable size diagonal | 1170 mm |
| Contrast ratio (dynamic) | 1000000:1 |
| Display number of colors | 16.78 million colors |
| Tuner type | Analog & digital |
| Supported TV bands | CATV, UHF, VHF |
| Analog signal format system | PAL, SECAM |
| HDMI ports quantity | 4 |
| USB 2.0 ports quantity | USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them. |
| Digital audio optical out | 1 |
| Component video (YPbPr/YCbCr) in | 3 |
| Headphone connectivity | 3.5 mm |
| Cables included | AC |
| Power consumption (standby) | 0.17 W |
| Power consumption (typical) | 162 W |
Weight and Dimensions| Depth (with stand) | 330 mm |
|---|---|
| Width (with stand) | 1123 mm |
| Height (with stand) | 772 mm |
| Weight (with stand) | 27500 g |
| Depth (without stand) | 96 mm |
| Height (without stand) | 725 mm |
| Weight (without stand) | 24000 g |
Important safety guidelines for handling the product and its components.
Precautions for lead-free solder and safety instructions for UK plugs.
Key technical data including power, dimensions, and screen size.
Details on system, ports, and signal compatibility for various inputs.
Information on LED error codes and how to access the self-diagnostic screen.
Procedures for entering service mode and adjusting TVM data settings.
Step-by-step instructions for removing external components like rear cover, stand, and switch unit.
Guides for removing various internal circuit boards like BA, HL4A, and IP1/IP2.
System block diagram, circuit locations, and PWB layouts for component identification.
Visual breakdowns and parts lists for chassis, bezel, stand, rear cover, and cords.
Comprehensive lists of electronic components for main boards, power supply, and accessories.
Guides and precautions for HIROSE connector handling and rear cover removal/installation.
To Next Page