Need help?Do you have a question about the Sony LBT-V925CD and is the answer not in the manual?
General| Brand | Sony |
|---|---|
| Model | LBT-V925CD |
| Category | Stereo System |
| Language | English |
Details the preamplifier's digital drive, parametric equalizer, presence surround, and dynamic sound functions.
Describes the independent power amplifier and its 80W + 80W output.
Details custom file, numeric buttons, music calendar, time edit, and optical digital transmission features.
Describes the quartz locked digital synthesizer and station preset capabilities.
Explains Dolby HX PRO, Dolby NR, Synchro start, fade edit, pre-amplifier processed recording, and CCLA functions.
Provides guidelines for unit placement, ventilation, and avoiding environmental hazards.
Instructions for inserting batteries into the remote commander.
Information on expected battery life and replacement for the remote commander.
General advice on connecting cords, plugs, and jacks correctly.
Diagram and instructions for connecting the remote control system.
Illustrates how to connect the left and right speakers to the amplifier.
Instructions for connecting the FM antenna for better reception.
Guidance on connecting the AM loop antenna for optimal signal.
Details on connecting the CD player using an optical cord.
Instructions for connecting surround sound speakers.
Diagram and precautions for connecting the system to AC power.
Identifies the parts and controls of the Tuner section.
Labels the various parts and controls of the Preamplifier section.
Explains how to select and configure speaker systems A and B.
Instructions on how to adjust the volume control safely.
Guidance on adjusting the balance control for stereo imaging.
Guides on setting the METER RANGE for different listening levels.
Directs to using equalizer, dynamic sound, and surround for sound adjustments.
Explains recording sound after it has been processed by equalizer, dynamic sound, or surround.
Step-by-step guide to playing a full compact disc.
Instructions on how to stop, pause, and remove a disc.
Guidance on playing smaller CDs correctly.
Warning about adjusting volume to prevent speaker damage.
Advice on keeping discs clean and protected from damage.
Explanation of the different information displayed during playback.
Methods for finding specific tracks on a CD during play or pause.
How to insert silent gaps between tracks for tape deck compatibility.
Techniques for searching specific points within a track.
How to play one track and then stop the unit.
Plays all selections on the disc repeatedly.
Repeats the currently playing track.
Repeats the programmed sequence of tracks.
Repeats all selections in a random order.
Repeats a section defined between two custom indexes.
Instructions for stopping, canceling, and navigating shuffle play.
How to select specific tracks for random playback.
Instructions for stopping, repeating, canceling, and erasing programs.
Guides on creating, checking, changing, and adding/deleting program tracks.
Details on adjusting blank spaces, understanding time displays, and checking remaining time.
Details Disc memo, Program bank, Custom index, and their indications.
Covers preparing memory, checking contents, and clearing files.
Includes memorizing, playing, and clearing program banks.
How to use program banks with various playback modes.
Steps for setting custom indexes, repeat points, and managing index order.
Covers rehearsal play release and understanding custom index indications.
Instructions for playing and repeating sections defined by custom indexes.
Covers clearing indexes, changing modes, and exiting custom index play.
Steps for automatically tuning into radio stations.
Explanation of TUNED and STEREO indicators.
Procedure for manually tuning radio stations.
Steps for tuning and storing stations using manual tuning.
Important notes and storage capacity for preset stations.
Instructions for recalling and scanning stored stations.
How to select between frequency and preset station scanning.
Instructions for stopping, selecting direction mode, and Dolby settings.
Details on usable tape types and playback behavior with multiple decks.
How to play tapes continuously from Deck A to Deck B.
How to start playback automatically after fast winding.
Steps for recording entire CD programs with fade editing.
Notes on tape length selection and playback delay.
Details on tune end handling and alternative recording modes (NORM, ERASE).
How to match CD track selection to tape length.
Steps to specify tape time and initiate recording.
Guides on recording opposite tape sides and preferential tune selection.
Using program edit to select tunes based on total tape time.
Instructions for recording one or both sides of a tape.
Covers speed selection, direction, Dolby settings, and troubleshooting.
How to dub specific selections using the auto pause feature.
Detailed steps for dubbing only desired sections of a tape.
Steps for dubbing tapes with manual sound adjustments.
Important considerations for sound adjustments during dubbing.
How to use demo mode to preview sound manipulation effects.
Lists Digital Parametric EQ, Surround, Dynamic Sound, and display functions.
Demonstrates frequency level adjustment and curve movement.
Illustrates curve synthesis and slope selection effects.
Details on DATA CALL (preset) and USER CALL (user memory).
How to exit demo mode and begin making sound quality adjustments.
Illustrates DPS modes and reverberation adjustments.
Shows DDS modes and spectrum/peak value display switching.
Procedure for selecting frequency bands to adjust.
How to modify sound levels using the digital controller.
How to change curve slope and reset the equalizer.
How to reverse the curve and confirm adjustments.
How to select MUSIC, MOVIE, or SIMULATED surround modes.
How to adjust reverberation time and level for desired atmosphere.
How to adjust the level of reverberated sound.
How to compare effects and turn off surround.
How to use DDS for powerful low-volume sound and external noise.
How to select DDS modes and confirm effects.
Details on Digital Presence Surround, Dynamic Sound, and Equalizer settings.
Descriptions of 10 preset sound combinations.
Table detailing equalizer settings for various frequency ranges.
Procedure to call up equalizer and surround/dynamic sound menu settings.
Procedure for saving individual sound effect settings to user memory.
How to recall previously stored user memory settings.
How to use Digital Sound Menu to generate and store user settings.
How to restore initial settings and erase adjustments.
How to select video and audio sources for playback or recording.
Instructions for recording video signals and dubbing videotapes.
Steps to select sources and adjust microphone volume.
How to record mixed sound and handle howling.
Instructions for cleaning heads, tape path, and the unit's exterior.
How to clean discs and demagnetize heads.
Resolving issues with power, audio, and volume.
Guides for CD player, radio reception, and cassette deck problems.
Technical details for Tuner, CD player, Power amplifier, and Cassette deck.
Specifications for Preamplifier inputs, general requirements, and outputs.
How to set VTRs, DAT, and recall user memory with the remote.
How to adjust EQ, Surround, DDS, and turn effects ON/OFF remotely.
To Next Page
