Sony MDR-1000X - Disconnecting BLUETOOTH connection (after use)

Help Guide
Wireless Noise Canceling Stereo Headset
MDR-1000X
Disconnecting BLUETOOTH connection (after use)
Hint
When you finish playing music, the BLUETOOTH connection may terminate automatically, depending on the BLUETOOTH device.
4-595-263-11(1) Copyright 2016 Sony Corporation
If using a device that supports one-touch connection (NFC), touch the device to the headset again.
(Unlock the screen of the device if it is locked.) If using a device that does not support one-touch
connection (NFC), operate from the BLUETOOTH device.
When disconnected, you hear voice guidance “BLUETOOTH disconnected”.
1
Press and hold the
button on the headset for about 2 seconds to turn off the headset.
You hear voice guidance “Power off”.
2
80