Studio Monitor Series Headphones
incorporate high-end materials and advanced engineering; critically clean, exceptionally clear
sound for professional and high delity applications
Reversible earcups
enable single-sided monitoring exibility
30 mm diameter drive units
are larger than many headphones for deeper bass, lower distortion and wider dynamic range;
bass response extends down to a low 18 Hz
500 mW power handling
stands up to day-in, day-out use at high output levels
Ferrite magnets
for high energy and compact size; help produce ample sound output -- 98 dB/mW sensitivity
Oxygen-free copper cord
for maximum conductivity, minimum noise; conducts electricity better than conventional copper
Supra-aural design
rests lightly on the ear; creates a controlled environment for better sound; driver is positioned the
correct distance from the ear canal
Wide, molded headband
distributes the headphone's weight over a wide area; reduced pressure means comfortable
listening for hours on end
Specications
Audio
Driver Unit
30mm
Frequency Response
18Hz - 22,000Hz
Impedance
24 ohms
Sensitivity (db)
98dB/mW
Audio Features
Ear Cups
Swivel, reversible for single-sided monitoring
General
Design
Over-the-head, studio monitor
Diaphragm
PET
Headband
Wide, Adjustable, Single
Magnet
Ferrite
Plug
Straight, stereo UniMatch® plug with xed mini plug and detachable phone plug,
3.5MM stereo mini jack, UniMatch® Adaptor
Type of Use
Portable, Home
Hardware
Cord
Oxygen-Free Copper; double-sided
MDR-V150
Studio monitor type headphones
To Next Page
Need help?
General
