Sony MDR-ZX500 Specifications

Multi Layer diaphragms
High quality large driver units accurately reproduce a broad, dynamic frequency range.
High Energy Neodymium Drivers
Ecient Neodymium drivers reproduce clear mid-range and low-end sound.
Pressure Relieving Earpads
Take the discomfort out of the equation and enjoy your extended music sessions in comfort.
Rugged Y-Type Cord
A rugged Y-type design makes for a tangle-free experience.
Specications
© 2011 Sony Electronics Inc. All rights reserved. Reproduction in whole or in part without
written permission is prohibited. Sony is a trademark of Sony. All other trademarks are
trademarks of their respective owners. Features and specications are subject to change
without notice. /Updated: December 20, 2011
Audio
Driver Unit
40 mm, dome type (CCAW Voice Coil)
Frequency Response
8 - 25,000Hz
Impedance
70 ohms at 1 kHz
Sensitivity (db)
104 dB/mW
General
Design
Over-the-head, Monitor
Diaphragm
PET
Headband
Wide, Adjustable
Magnet
Neodymium
Plug
Gold-plated, L-shaped stereo mini plug
Type of Use
Portable, Home, Studio
Hardware
Cord
Oxygen-Free Copper; Single-sided
Headphone Type
Closed supra-aural, Dynamic
Power
Power Handling Capacity
1500 mW
Weights and Measurements
Cord Length (Approx.)
47 1/4 in (1.2 m)
Weight (Approx.)
180 g (6.34 oz)
Accessories
Supplied Accessories
Operating Instructions (1)
MDR-ZX500

Sony MDR-ZX500 Specifications

Driver and Sound

driver unit	40 mm
impedance	70 Ω at 1 kHz
sensitivity	104 dB/mW
frequency response	8 – 25, 000 Hz

Power Handling

power handling capacity	1, 500 mW
power handling standard	IEC

Cable and Plug

cord length	1.2 m
plug type	Gold-plated L-shaped stereo mini plug

Weight

mass	180 g without cord