14
I~Miil
•
Do
not
use
USB
devices so large
or
heavy that
they may fall down due to vibration, or cause a
loose connection.
•
Do
not
detach the front panel during playback
of
the
USB
device, otherwise
USB
data may be
damaged.
Changing
display
items
Press
(
DSPL
) .
Displayed items may differ depending on
the
USB
device, recording format and
settings.
I~Mi¥1
•
The
maximum
number
of
displayable data
is
as
follows.
- folders (albums):
128
- files (tracks)
per
folder: 500
•
It
may
take time for playback to begin,
depending
on
the
amount
of
recorded data.
•
DRM (Digital Rights Management) files may
not
be played.
•
During
playback
or
fast-forward/reverse
of
a
VBR
(Variable Bit Rate) MP3/WMA/ AAC file,
elapsed playing time may
not
display
accurately.
• Playback
of
the following MP3/WMA/ AAC
files
is
not
supported.
- lossless compression
- copyright-protected
iPod
In these Operating Instructions,
((iPod"
is
used
as
a general reference for the
iPod
functions
on
the iPod and
iPhone,
unless
otherwise specified by the text
or
illustrations.
For details on the compatibility
of
your
iPod,
see ((About
iPod"
(page
38)
or
visit the
support site
on
the back cover.
Before connecting the
iPod,
turn down the
volume
of
the unit.
1
Open
the
USB
cover,
then
connect
the
iPod
to
the
USB
connector with a
USB
connection
cable for
iPod
(not
supplied)*.
*
RC-lOOIP
USB
connection cable for
iPod
is
recommended.
The tracks
on
the
iPod start playing
automatically from the point last played.
If
an iPod
is
already connected, to start
playback press
(SOURCE/OFF)
repeatedly until
((USB"
appears.
(((IPD"
appears in the display when
iPod
is
recognized.)
Press
and hold
(SOURCE/OFF)
for
1
second to stop playback.
To remove the
iPod,
stop
iPod
playback,
then remove the iPod.
To Next Page
Loading...
