Basic Operations
17
You can record the radio program on a tape
by calling up a preset station. You can use
TYPE I (normal) or TYPE II (CrO2) tapes. The
recording level is automatically adjusted.
continued
To listen to non-preset radio
stations
Press TUNING MODE repeatedly until
“MANUAL” or “AUTO” appears in step 2,
then tune in the station by turning the jog
dial.
Tips
• Pressing TUNER/BAND when the power is off
automatically turns the power on and tunes to the
last received station (One Touch Play).
• You can switch from another source to the radio
just by pressing TUNER/BAND (Automatic
Source Selection).
• When an FM program is noisy, press
STEREO/MONO repeatedly until “MONO”
appears in the display. There will be no stereo
effect, but the reception will improve. Press the
button again to restore the stereo effect.
• To improve broadcast reception, reorient the
supplied antennas.
Recording from the
radio
Turn clockwise
for higher
preset numbers.
Turn counter-
clockwise for
lower preset
numbers.
Preset number Frequency
PRESET
TUNED
STEREO
MHz
VOLUME
FM 3 104.00
20
1 Press TUNER/BAND repeatedly
until the band you want appears.
2 Press TUNING MODE repeatedly
until “PRESET” appears.
3 Turn the jog dial to tune in the
desired preset station.
416
DOLBY NR πSTOP
3275
POWER
To Next Page
Loading...
