43
4 Set the time to start recording.
Turn the jog dial to set the hour, then
press ENTER.
The minute indication starts flashing.
Turn the jog dial to set the minute, then
press ENTER.
The hour indication flashes again.
5 Set the time to stop recording
following the above procedure.
The start time appears, followed by the
stop time, the recording source and the
radio station, then the original display
appears.
6 Insert a blank tape into deck B.
7 Turn off the power.
When the recording starts, the volume
level is set to the minimum.
To check the setting
Press TIMER SELECT and turn the jog dial to
select “REC”, then press ENTER. To change
the setting, start over from step 1.
To cancel the timer operation
Press TIMER SELECT and turn the jog dial to
select “OFF”, then press ENTER.
Note
If the power is on at the preset time, the recording
will not be made.
TITLE
AUTO
ALL
1
DISC
S
PROGRAM
CD TEXT
RELAY
TUNED
1
2
REC
SLEEP
STEREO
MONO
SYNC
SUR
VOLUME
PLUS
1
20
ON 1:00AM
To Next Page
Loading...
