59
GB
MHC-GT5D.GB.4-570-734-11(1)
Sound Adjustment
Creating a party
atmosphere
(DJ EFFECT)
Use the buttons on the subwoofer to
perform this operation.
1 Press the following button to
select the effect type.
• FLANGER: Creates a deep
flanging effect that is similar to
the roar of a jet plane.
• ISOLATOR: Isolates a specific
frequency band by adjusting the
other frequency bands. This is
useful when you want to focus
on the vocals.
• SAMPLER: Provides a series of
special sound effects.
2 Change the sound effect.
For FLANGER and ISOLATOR :
Turn the VOLUME/DJ CONTROL
knob to adjust the effect level.
For SAMPLER:
Press SAMPLER repeatedly to select
“SAMPLER1” or “SAMPLER2,” then
press S1/S2/S3/S4 to output the
sampler sound effect.
To output other sampler sound
effect continuously, turn the
VOLUME/DJ CONTROL knob.
To turn off the effect
Press DJ OFF or the selected effect
button again (for FLANGER and
ISOLATOR only).
Notes
••
The DJ EFFECT is automatically turned
off when you:
— turn off the system
— change the function
— change the tuner band
— activate or deactivate the Party Chain
function
— activate the Virtual Football mode
••
The DJ EFFECT does not affect the
transferred audio files. Transferred
audio files will be generated without
the DJ EFFECT even if you have activated
it.
••
You cannot use VOLUME/DJ CONTROL
on the subwoofer to adjust the volume
when the DJ EFFECT is activated. Press
+/– on the remote control to adjust
the volume.