Sony MHC-GT7DW Help Guide

Help Guide
Home Audio System
MHC-GT7DW
Connecting to a Wi-Fi network using a PC connected wirelessly (Windows 7/Windows
8.1)
Note that the home audio system should be reset to the factory default for this connection. All BLUETOOTH device
registration (pairing) information is deleted. To use the BLUETOOTH connection after that, delete all pairing information
on the PC, and then set pairing again.
This section describes how to connect a Windows 7 or Windows 8.1 PC and the home audio system wirelessly, then how
to connect the home audio system to a wireless router, using the PC.
Do the following before starting.
Disconnect the LAN cable (not supplied) from the home audio system.
Place the home audio system closer to the wireless router.
Locate the SSID (the name of a wireless network) and encryption key (WEP or WPA), which are required to set up a
Wi-Fi network. The encryption key restricts access to devices on a network. It is used to make more secure
communication between the devices connected to wireless routers and access points.
Have the Wi-Fi network name (SSID) and password (encryption key) of the wireless router available for
reference.
For details, refer to the operating instructions supplied with your wireless router.
1
Reset the home audio system by using the remote control.
2
Unplug the AC power cord (mains lead), then plug it back in.
1.
Press
(power) button to turn on the home audio system.
2.
Press OPTIONS button.
3.
Press
/ button repeatedly to select [SYSTEM], then press (enter) button.
4.
Press
/ button repeatedly to select [RESET], then press (enter) button.
5.
Press
/ button repeatedly to select [YES], then press (enter) button.
[RESET] appears on the display.
The settings of the home audio system return to their factory defaults, and network settings and all
BLUETOOTH device registration (pairing) information are deleted.
6.
Turn on the home audio system.
The power indicator lights up in green. Wait until the NETWORK indicator flashes in white. It takes about 2 minutes
(in some cases, 4 or 5 minutes).
3
Connect the home audio system to the PC.
4
For Windows 8.1, click or tap the desktop on the Start screen.
1.
Select
or on the right-bottom of the screen.
2.
Select [MHC-GT7DW] from the network list.
3.
Display the [Sony Network Device Settings] screen.
5
37

Sony MHC-GT7DW Specifications

General

FM radio	Yes
Audio (L/R) in	1
Connectivity technology	Wireless
Type	Trolley Public Address (PA) system
Product color	Black
Number of wheels	2 wheel(s)
Power source type	-
Power consumption (standby)	0.5 W
Frequency range	87.5 - 108 MHz
Tweeter diameter	10 mm
Number of speakers	2
RMS rated power	- W

Weight and Dimensions

Depth	540 mm
Width	480 mm
Height	805 mm
Weight	38900 g
Speaker weight	3800 g
Speaker dimensions (W x D x H)	600 x 118 x 145 mm