CD/VIDEO CD/MP3 file
11
GB
Switch to CD
function from
another source
Press DISC 1 – 3 (Automatic
Source Selection).
Remove a CD Press Z OPEN/CLOSE.
Exchange other
CDs while
playing
Press DISC SKIP/EX-CHANGE.
Play repeatedly
(Repeat Play)
Press REPEAT during play until
“REP” or “REP 1” appears.
REP*
2
: For all the tracks on the
CD up to five times.
REP 1*
3
: For a single track only.
To cancel playing repeatedly, press
REPEAT until “REP” and
“REP 1” disappear.
*
1
DISC 1 – 3 are not available when “ALL DISCS
SHUF” is selected.
*
2
You cannot select “REP” and “ALL DISCS
SHUF” at the same time.
*
3
When you select “REP 1”, that track is repeated
endlessly until “REP 1” is canceled.
Note
The play mode cannot be changed while playing a
disc. To change the play mode, press x first to stop
playing.
Stop play Press x.
Pause Press X. Press again to resume
play.
Select a track During play or pause, press >
or ..
Select a CD in
stop mode
Press DISC 1 – 3*
1
or DISC SKIP/
EX-CHANGE (or D.SKIP on the
remote).
Find a point
in a track
(Lock Search
Function)
During play, press M or m.
At the desired point, press hH
(or nN on the remote) to stop
searching and start playback.
Other Operations
To Do this
Playing a track by entering the track
number
Press the number button(s) on the remote to
enter the track number of the track you want to
play.
To enter a track number over 10
1 Press >10.
2 Enter the corresponding digits.
To enter 0, press 10/0 instead.
Example:
To play track number 30, press >10, then 3 and
10/0.
To Next Page
Loading...