CD/VIDEO CD/MP3 file
19
GB
Resuming playback from
the point you stopped a
VIDEO CD
— Resume Play
The system memorizes the point where you
stopped the VIDEO CD so that you can resume
from that point.
Resume Play is not available for an audio CD
and a disc with MP3 files.
1 While playing a VIDEO CD, press x to
stop playback.
“RESUME” appears on your TV screen.
If “RESUME” does not appear, Resume
Play is not available.
2 Press hH (or nN on the remote).
The player starts playback from the point
you stopped the VIDEO CD in step 1.
To view from the beginning of the
VIDEO CD
When “RESUME” appears on your TV screen,
press x, then press hH (or nN on the
remote).
Notes
• Resume Play is not available in the Digest, Shuffle,
or Program Play modes.
• Depending on where you stopped the VIDEO CD,
the player may resume playback from a different
point.
• Resume Play is canceled when:
– you press the number buttons, PLAY MODE, x,
DISC SKIP/EX-CHANGE (or D.SKIP on the
remote), or ./>.
– you remove the VIDEO CD.
– you turn off the system.
– you change the function.
– you unplug the AC power cord.
Adjusting the VCD picture
— Picture Effect
You can adjust the hue and sharpness of the
VCD picture.
1 Press PICTURE EFFECT during
playback.
2 Press b or B repeatedly to adjust the
hue.
3 Press v or V repeatedly to adjust the
sharpness.
4 Press ENTER or PICTURE EFFECT.
Tip
The hue and sharpness can be adjusted in 11 steps
(from –5 to +5).
To Next Page
Loading...
Need help?
General
